Saltar al contenido
MilliporeSigma
  • Use of multi-parameter flow cytometry as tool to monitor the impact of formic acid on Saccharomyces carlsbergensis batch ethanol fermentations.

Use of multi-parameter flow cytometry as tool to monitor the impact of formic acid on Saccharomyces carlsbergensis batch ethanol fermentations.

Applied biochemistry and biotechnology (2013-01-30)
Cláudia Freitas, Elisabete Neves, Alberto Reis, Paula C Passarinho, Teresa Lopes da Silva
RESUMEN

The use of lignocellulosic materials as substrate for bioethanol production is considered a cost-effective approach to make the biofuel production process economically sustainable. However, lignocellulosic hydrolysis releases toxic compounds such as weak acids which inhibit microorganism growth and ethanol production. In order to understand the physiological response of Saccharomyces carlsbergensis when fermenting glucose in the presence of formic acid (HF), the yeast growth was monitored by multi-parameter flow cytometry. Cytoplasmic membrane potential decreased as the HF concentration increased and as the yeast culture reached the stationary phase. However, the proportion of cells with permeabilized membrane did not increase with the HF concentration increase. The accumulation of reactive oxygen species was also monitored. Control and fermentations at low HF concentrations (<1 g/L) resulted in a high proportion of highly oxidized cells at the stationary phase. The multi-parameter flow cytometry approach proved to be a useful tool to monitor the physiological stress response of S. carlsbergensis growth and ethanol production in the presence of HF, an inhibitor present in lignocellulosic hydrolysates. The information here obtained at near real time can be used to enhance second-generation bioethanol production process efficiency.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Supelco
Formato de amonio, eluent additive for LC-MS, LiChropur, ≥99.0%
Sigma-Aldrich
Formato de amonio, reagent grade, 97%
Sigma-Aldrich
Formato de amonio, ≥99.995% trace metals basis
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Sodium formate, ACS reagent, ≥99.0%
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Sigma-Aldrich
Potassium formate, ReagentPlus®, 99%
Sigma-Aldrich
Formato de amonio, BioUltra, ≥99.0% (calc. based on dry substance, NT)
Sigma-Aldrich
Sodium formate, reagent grade, 97%
Sigma-Aldrich
Ácido fórmico, ≥95%, FCC, FG
Sigma-Aldrich
Sodium formate, BioUltra, ≥99.0% (NT)
Supelco
Ammonium formate solution, 10 mM in H2O, suitable for HPLC
Sigma-Aldrich
Cesium formate, 98%
Sigma-Aldrich
Sodium formate, 99.998% trace metals basis