推薦產品
AC/DC 輸入
, Japan plug
特點
to hold 96-well plate or 0.1/0.2 mL tubes
包裝
pack of 1 ea
製造商／商標名
Eppendorf® 6381000018
參數
4-99 °C temp. range
尋找類似的產品？ 前往 產品比較指南
一般說明
Evolve your PCR experiments together with the new Mastercycler® X40. Take the next step to a digital lab and keep a small footprint, reliability and flexibility.
Flexibility
You have got varying sample numbers? No problem, the high-quality aluminum block of Mastercycler X40 fits to all common consumables. Unskirted, semi-skirted and skirted plates as well as 0.1, or 0.2 mL tubes and tubestrips can be used. The SafeLid adapts to the height of the Small
Footprint
No space in your lab? Mastercycler X40 has a small footprint and air vents on its back to fit even in small spaces left over on your lab bench. Its measures are only 24.5 x 38.5 x 23 cm (W × D × H). Additionally it is lightweight of only 7.25 kg.consumables and applies optimal pressure for evaporation protection.
Ease-of-use
Struggling with complicated programming? The ultimate touchscreen interface and easy programming of the proven Mastercycler software speeds up programming of new protocols. Intuitive protocol drawing allows to create your program in one step with only one finger. The Mastercycler X40 is the first Eppendorf device to feature a short instruction included in the package, the full digital manual is available in multiple languages via QR code online.
Productivity
Are you always rushing? Time is everything in science. The aluminum block of Mastercycler X40 heats with max. 3.3 °C/s and cools with max. 1.5 °C/s to enable fast PCR runs. You can fill up your consumables and run your PCR with up to 100 µL to increase yield and reduce downstream clean-up efforts.
Ergonomics
Worrying about your health? Our Mastercycler X40 is designed to be ergonomic. Low noise level, easy programming, low weight, easy opening and closing and status LED that you can see from a distance make your life easier and healthier.
Sustainability
Reduce Your CO2 Footprint! The e Mastercycler X40 shows with 0.134 kWh an extremely low power consumption for a PCR run. The power consumption of other thermal cyclers can be 35-70 % higher. The difference between 0.134 kWh and 0.473 kWh per PCR run resembles a difference of around 124 g of CO2 emissions. That’s enough to fill around 11 party balloons. Over a year, this can add up to additional CO2 emissions of 129 kg. The Mastercycler X40 is packed in a cardboard box, with only two small recyclable plastic bags to protect the device and cable from dust. The packaging contains only a short manual to start right away. The full manual is available via QR code. Small footprint and low weight enables more devices to be shipped on one palette – and with this reduces spendings on gas/fuel and freight for each single device.
Flexibility
You have got varying sample numbers? No problem, the high-quality aluminum block of Mastercycler X40 fits to all common consumables. Unskirted, semi-skirted and skirted plates as well as 0.1, or 0.2 mL tubes and tubestrips can be used. The SafeLid adapts to the height of the Small
Footprint
No space in your lab? Mastercycler X40 has a small footprint and air vents on its back to fit even in small spaces left over on your lab bench. Its measures are only 24.5 x 38.5 x 23 cm (W × D × H). Additionally it is lightweight of only 7.25 kg.consumables and applies optimal pressure for evaporation protection.
Ease-of-use
Struggling with complicated programming? The ultimate touchscreen interface and easy programming of the proven Mastercycler software speeds up programming of new protocols. Intuitive protocol drawing allows to create your program in one step with only one finger. The Mastercycler X40 is the first Eppendorf device to feature a short instruction included in the package, the full digital manual is available in multiple languages via QR code online.
Productivity
Are you always rushing? Time is everything in science. The aluminum block of Mastercycler X40 heats with max. 3.3 °C/s and cools with max. 1.5 °C/s to enable fast PCR runs. You can fill up your consumables and run your PCR with up to 100 µL to increase yield and reduce downstream clean-up efforts.
Ergonomics
Worrying about your health? Our Mastercycler X40 is designed to be ergonomic. Low noise level, easy programming, low weight, easy opening and closing and status LED that you can see from a distance make your life easier and healthier.
Sustainability
Reduce Your CO2 Footprint! The e Mastercycler X40 shows with 0.134 kWh an extremely low power consumption for a PCR run. The power consumption of other thermal cyclers can be 35-70 % higher. The difference between 0.134 kWh and 0.473 kWh per PCR run resembles a difference of around 124 g of CO2 emissions. That’s enough to fill around 11 party balloons. Over a year, this can add up to additional CO2 emissions of 129 kg. The Mastercycler X40 is packed in a cardboard box, with only two small recyclable plastic bags to protect the device and cable from dust. The packaging contains only a short manual to start right away. The full manual is available via QR code. Small footprint and low weight enables more devices to be shipped on one palette – and with this reduces spendings on gas/fuel and freight for each single device.
特點和優勢
- 12-column gradient
- SafeLid for evaporation protection
- Small footprint (less than a piece of paper)
- Lightweight
- Touchscreen
- Intuitive software and user interface
- 2-year warranty
- Program migration feature
- Visionize Labsuite connection possible
- Low noise level
法律資訊
Eppendorf is a registered trademark of Eppendorf AG
Mastercycler is a registered trademark of Eppendorf AG
儲存類別代碼
11 - Combustible Solids
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務