推薦產品
等級
puriss.
化驗
99.0-101.0% (based on anhydrous substance)
形狀
powder
品質
meets analytical specification of NF, E 516
雜質
residual solvents, in accordance
≤0.001% heavy metals (as Pb)
損耗
19.0-23.0% loss on drying, 250 °C
負離子痕跡
chloride (Cl-): ≤100 mg/kg
fluoride (F-): ≤30 mg/kg
正離子痕跡
As: ≤3 mg/kg
Fe: ≤50 mg/kg
Hg: ≤10 mg/kg
Pb: ≤5 mg/kg
Se: ≤30 mg/kg
SMILES 字串
O.O.[Ca++].[O-]S([O-])(=O)=O
InChI
1S/Ca.H2O4S.2H2O/c;1-5(2,3)4;;/h;(H2,1,2,3,4);2*1H2/q+2;;;/p-2
InChI 密鑰
PASHVRUKOFIRIK-UHFFFAOYSA-L
尋找類似的產品？ 前往 產品比較指南
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 1
閃點（°F）
Not applicable
閃點（°C）
Not applicable
客戶也查看了
The crystallization of calcium sulfate dihydrate.
Smith BR and Sweett F.
Journal of Colloid and Interface Science, 37(3), 612-618 (1971)
Calcium sulfate dihydrate (gypsum) scale formation on heat exchanger surfaces: The influence of scale inhibitors.
Amjad Z.
Journal of Colloid and Interface Science, 123(2), 523-536 (1988)
K N Lewis et al.
Journal of materials science. Materials in medicine, 17(6), 531-537 (2006-05-13)
Calcium sulfate (CS) is one of the oldest bone graft materials still in use. Its main limitations are poor handling characteristics, poor mechanical properties, and a resorption rate that is too fast for some applications. The present study investigated the
Massimo Peruffo et al.
Physical chemistry chemical physics : PCCP, 15(6), 1956-1965 (2012-12-22)
Dissolution processes at single crystal surfaces often involve the initial formation and expansion of localized, characteristic (faceted) etch-pits at defects, in an otherwise comparatively unreactive surface. Using natural gypsum single crystal as an example, a simple but powerful morphological analysis
Accuracy of dies captured by an intraoral digital impression system using parallel confocal imaging.
So-Yeun Kim et al.
The International journal of prosthodontics, 26(2), 161-163 (2013-03-12)
The purpose of this investigation was to measure the accuracy of digital impressions (DIs) compared to conventional impressions (CIs). Using the iTero system, a master cast was scanned to produce stereolithography dies. As a control group, silicone impressions were taken
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務