推薦產品
材料
PVDF membrane
PVDF vent cap
fluoroelastomer FKM seal
polycarbonate
polypropylene support
品質等級
法律遵循
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
無菌
non-sterile
滅菌相容性
autoclavable compatible
產品線
OptiScale® 47
特點
hydrophilic
製造商/商標名
OptiScale®
參數
25 °C max. inlet temp.
5.5 bar max. inlet pressure (80 psi) at 25 °C
80 psig max. inlet pressure
技術
bioburden reduction: suitable
長度
2.91 in.
寬度
2.75 in.
直徑
6.9 cm (2.7 in.)
過濾面積
17.7 cm2
入口接頭直徑
3/4 in.
出口接頭直徑
3/4 in.
雜質
≤0.25 EU/mL (LAL test, Aqueous extraction)
基質
Durapore®
孔徑
0.45 μm
輸入
sample type liquid
接頭
inlet sanitary flange
outlet sanitary flange
(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)
運輸包裝
ambient
一般說明
Device Configuration: 取样皿滤膜
其他說明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use
- Organism Retention: Bacterial
- Mode of Action: Filtration (size exclusion)
- Application: Protein purification
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
- Storage Statement: Please refer OPTISCALE®-25 user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
準備報告
Sterilization Method
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
分析報告
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
法律資訊
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
未找到適合的產品?
試用我們的產品選擇工具.
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務