SLGVVR255F
Millex® PVDF syringe filter
pore size 0.22 μm, diam. 25 mm, sterile, hydrophilic, vented
同義詞:
Vented Millex®-GV 0.22 µm Filter Unit, Vented Millex®-GV Filter Unit, vented syringe filter, domed filter, syringe filter, low-binding filter
登入查看組織和合約定價
全部照片(1)
About This Item
分類程式碼代碼:
41104922
NACRES:
NB.24
推薦產品
材料
PVC housing
PVDF membrane
品質等級
無菌
ethylene oxide treated
sterile
產品線
Millex®
特點
hydrophilic
vented
包裝
pack of 50 ea
製造商／商標名
Millex®
技術
low protein-binding filtration: suitable
sterile filtration: suitable
直徑
25 mm
過濾面積
4 cm2
housing diam.
29 mm
inlet to outlet H
27 mm
容積
100 mL
基質
Durapore®
孔徑
0.22 μm
輸入
aqueous solution(s)
起泡點
≥50 psi
接頭
female Luer-Lok® inlet
male Luer outlet slip
一般說明
Vented Millex®-GV filter units are syringe filters for sterilization of low volume aqueous solutions where venting and low protein-binding membrane is desired.
特異性
Materials
Filter membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), pore size 0.22 μm, type GV
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm2 (0.62 in2) Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.1 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge (typical volume when vent hole is covered to prevent air flow)
Sterilization method: Ethylene oxide gas
Connections Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 40 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, yellow outlet
Filter membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), pore size 0.22 μm, type GV
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm2 (0.62 in2) Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.1 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge (typical volume when vent hole is covered to prevent air flow)
Sterilization method: Ethylene oxide gas
Connections Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 40 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, yellow outlet
應用
Syringe filter for vented sterile filtration of low volume aqueous solutions
特點和優勢
- For research use only (RUO)
- Single use only
- Low protein binding
- Vented inlet to prevent air locking
- Non-pyrogenic and non-toxic
法律資訊
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
未找到適合的產品？
試用我們的產品選擇工具.
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務