推薦產品
材料
PTFE membrane
polypropylene
polypropylene housing
品質等級
無菌
non-sterile
滅菌相容性
gamma compatible
產品線
Aervent®
特點
hydrophobic
製造商/商標名
Aervent®
參數
2.1 bar max. differential pressure at 25 °C
4.1 bar max. inlet pressure (60 psi) at 25 °C
技術
gas filtration: suitable
長度
5.3 cm (2.1 in.)
寬度
2.4 in.
直徑
6.2 cm (2.4 in.)
過濾面積
19.6 cm2
雜質
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
重量法萃取物
≤1.0 mg
基質
Aervent®
孔徑
0.2 μm pore size
起泡點
≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
接頭
(3 mm (1/8 in.) NPT Inlet and Outlet)
一般說明
Prostak™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.
This Prostak™ microfiltration open-channel module features a Pore Size of 0.1 μm and a filtration area of 0.17 m2. PSVVAG021 is available in a 2 stack, making it applicable for bench-top, pilot, and production scale systems.
The modules can be integrity tested and steam sterilized for 20 cycles.
Prostak™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.
This Prostak™ microfiltration open-channel module features a Pore Size of 0.1 μm and a filtration area of 0.17 m2. PSVVAG021 is available in a 2 stack, making it applicable for bench-top, pilot, and production scale systems.
The modules can be integrity tested and steam sterilized for 20 cycles.
Prostak™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.
應用
Typical Applications
- Sterile venting of vessels and carboys
- Autoclave vacuum break lines
- Low volume sterile filtration of non-aqueous fluids
- Small fermenter inlet and exhaust gas filtration
準備報告
Sterilization Method
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable
分析報告
Bacterial Retention
通过 ASTM F838-83 方法对缺陷短波单胞菌 (ATCC® 19146)进行定量截留的比率为 107 CFU/cm2
通过 ASTM F838-83 方法对缺陷短波单胞菌 (ATCC® 19146)进行定量截留的比率为 107 CFU/cm2
Gravimetric Extractables: in 70/30 % IPA/water
其他說明
Directions for Use
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
法律資訊
AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany
ATCC is a registered trademark of American Type Culture Collection
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Prostak is a trademark of Merck KGaA, Darmstadt, Germany
未找到適合的產品?
試用我們的產品選擇工具.
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務