推薦產品
材料
PVDF
PVDF vent cap
polycarbonate
polycarbonate support
品質等級
無菌
irradiated
non-sterile
滅菌相容性
gamma compatible
產品線
Millipak®
特點
gamma compatible
hydrophilic
製造商/商標名
Millipak®
參數
0.35 bar max. differential pressure (5 psid) at 123 °C (Forward)
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse)
1.7 bar max. differential pressure (25 psid) at 80 °C (Forward)
11 L/min flow rate at 2.8 bar (ΔP)
4.1 bar max. differential pressure (60 psid) at 25 °C (Forward)
5.2 bar max. inlet pressure (75 psi) at 25 °C
50 L process volume
技術
bioburden reduction: suitable
長度
5.1 in.
寬度
3.0 in.
過濾面積
500 cm2
入口接頭直徑
3/4 in.
出口接頭直徑
3/4 in.
雜質
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
重量法萃取物
≤2.5 mg/device
基質
Durapore®
孔徑
0.45 μm
起泡點
≥1790 mbar (26 psig), air with water at 23 °C
接頭
inlet sanitary flange
outlet sanitary flange
(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)
一般說明
包裝
其他說明
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
準備報告
3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable
分析報告
法律資訊
未找到適合的產品?
試用我們的產品選擇工具.
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務