D00572S01

Clarigard^® 筒式过滤器

pore size 0.5 μm, cartridge nominal length 20 in. (50 cm), filter diam. 2.75 in. (7 cm), Code 7

• 分類程式碼代碼: 23151806

屬性

• 材料: polypropylene filter; silicone seal
• 品質等級: 400
• 特點: hydrophilic
• 製造商／商標名: Clarigard^®
• 參數: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• 柱標稱長度: 20 in. (50 cm)
• 過濾器直徑: 2.75 in. (7 cm)
• 雜質: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• 孔徑: 0.5 μm pore size
• 柱代碼: Code 7

描述

一般說明

Cartridge Type: Liquid

Clarigard^® filters′ 99.99% retention rating characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

Device Configuration: Cartridge

準備報告

Sterilization Method:
10 autoclave cycles or SIP at 126°C for 30min

分析報告

Gravimetric Extractables: ≤ 20mg after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6L

其他說明

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

法律資訊

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany