推薦產品
材料
mixed cellulose esters (MCE)
品質等級
法律遵循
meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food)
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
無菌
non-sterile
滅菌相容性
autoclavable compatible
steam-in-place compatible
產品線
Milligard®
特點
hydrophilic
製造商/商標名
Milligard®
技術
prefiltration: suitable
長度
10 in.
寬度
2.9 in.
柱標稱長度
10 in. (25 cm)
過濾面積
0.7 m2
雜質
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
重量法萃取物
≤50 mg/cartridge
基質
Milligard®
pore size
1.2/0.5 μm nominal pore size
1.2/0.5 μm pore size
輸入
sample type liquid
柱代碼
Code F (double open end w/flat gaskets)
尋找類似的產品? 前往 產品比較指南
一般說明
Device Configuration: Cartridge
特點和優勢
Format: Double Layer
其他說明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use:
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to the installation and wetting sections of OptiScale®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
- Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
規格
Filter Grade: Standard Milligard® Media
準備報告
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
分析報告
Gravimetric Extractables: after 24 hours in water at controlled room temperature
法律資訊
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務