推薦產品
材料
TPE seal
polypropylene
品質等級
製造商/商標名
Clarisolve®
參數
2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)
2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)
2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)
2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
高度
14 cm (5.3 in.)
長度
22 cm (8.5 in.)
寬度
7.4 cm (2.9 in.)
過濾面積
0.014 m2
雜質
<0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
輸入
sample type liquid
傅導性
≤0.15 μS/cm
運輸包裝
ambient
一般說明
product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.
應用
High-density cell cultures
規格
Filter Grade: 60HX
準備報告
Sterilization Method
Integrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.
Integrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.
分析報告
Total organic carbon (TOC) residue: Measured at below detectable limits.
法律資訊
CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務