CMP272TS1

Milligard PES 20" 1.2/0.2 µm 标称滤芯

pore size 1.2/0.2 μm, cartridge nominal length 20 in. (50 cm)

• 同義詞: Milligard^® PES 1.2/0.2 µm 标称，小柱
• 分類程式碼代碼: 23151806
• eCl@ss: 32031690

屬性

• 材料: polyethersulfone membrane; polypropylene housing; polypropylene support; polypropylene vent cap
• 品質等級: 400
• 法律遵循: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 無菌: non-sterile
• 滅菌相容性: autoclavable compatible; steam-in-place compatible
• 產品線: EMPROVE^® Filter; Milligard^®
• 特點: hydrophilic
• 製造商／商標名: Milligard^®
• 參數: 1.38 bar max. differential pressure (20 psid) at 25 °C (Reverse); 5.52 bar max. differential pressure (80 psid) at 4-25 °C (Forward)
• 技術: bioburden reduction: suitable
• 長度: 22.8 in.
• 寬度: 2.7 in.
• 柱標稱長度: 20 in. (50 cm)
• 直徑: 69 mm (2.71 in.)
• 過濾面積: 1.20 m²
• 雜質: <0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction; meeting requirements of USP <85>, EP 2.6.14 and JP 4.01)
• 基質: Milligard^® PES
• pore size: 1.2/0.2 μm nominal pore size; 1.2/0.2 μm pore size
• 輸入: sample type liquid
• 柱代碼: Code 7

描述

一般說明

Device Configuration: Cartridge

特點和優勢

Format: Double Layer

其他說明

The product is manufactured in a facility which adheres to Good Manufacturing Practices. The manufacturing facility’s Quality Management System is approved by an accredited registering body to the appropriate ISO 9001 Quality Standard.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer wetting instructions of Filters with MILLIGARD^® PES Membrane user guide
• Storage Statement: Please refer Filters with MILLIGARD^® PES Membrane user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

準備報告

Sterilization Method
Autoclave wet 25x, 60 minute cycles at 128°C. In-line steam (wet): 10 forward cycles, 30 min.,
135 °C at ≤0.34 bar (5 psid) and 5 reverse cycles,
30 min., 135 °C at ≤0.07 bar (<1 psid)*.
*Devices were validated using steam at full differential pressure starting at 31 psid to a final differential pressure of 1 psid, resulting in a calculated average of 4 psid in forward and reverse directions.

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

法律資訊

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany