推薦產品
品質等級
ligand
(Sulfoisobutyl)
描述
strong cation exchanger, suspension in 20% ethanol and 150 mM NaCl (40-90 µm)
無菌
sterile (Caustic Stable)
產品線
Fractogel®
形狀
resin
特定分析物
MAbs
參數
8 bar max. pressure
基質活性組
methacrylate
平均粒徑
40-90 μm
容量
130 mg binding capacity (lysozyme/ml of resin)
轉變溫度
flash point 35 °C (Does not sustain combustion.)
密度
1.43 g/cm3 at 20 °C
體積密度
1000 kg/m3
應用
recombinant protein
vaccine development
分離技術
cation exchange
strong cation exchange
儲存溫度
2-30°C
尋找類似的產品? 前往 產品比較指南
一般說明
Strong cation exchange Fractogel® resin featuring the tentacle technology, for purification of basic and neutral proteins (e.g. antibodies) and peptides
特點和優勢
Fractogel® EMD SO3- (M) enables:
Due to the titration behavior, the ion exchange capacity can be used from pH 2 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the surface′s positively charged regions and the support. Proteins are retained efficiently on Fractogel® EMD SO3- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).
The strength of the binding depends on the following:
- Increased binding strength at low pH
- High aggregate removal efficiency combined with high dynamic binding capacity
- Lower elution volumes for the highest purity levels
- Compatibility with 2.5 % (v/v) aqueous benzyl alcohol containing 150 mM NaCl storage solution
Due to the titration behavior, the ion exchange capacity can be used from pH 2 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the surface′s positively charged regions and the support. Proteins are retained efficiently on Fractogel® EMD SO3- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).
The strength of the binding depends on the following:
- the buffer system
- pH value of the buffer which determines the surface charge of the protein
- the concentration of the counter ions
- the charge density on the support (protein binding capacity)
包裝
- 1.16882.0100: Fractogel® EMD SO3- (M) Resin 100ml
- 1.16882.0010: Fractogel® EMD SO3- (M) Resin 10ml
- 1.16880.0500: Fractogel® EMD SO3- (M) Resin 500ml
- 1.16882.5000: Fractogel® EMD SO3- (M) Resin 5L
Plastic bottle
分析報告
Appearance: Milky turbid suspension,free from impurities(foreign particles)
Microscopic evaluation: Uniform spherical particles,no agglomerates, no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 1 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 110 - 150 mg/ml
Functional test (b:a): ≤ 0.4
Functional test (c:d): ≤ 0.45
Functional test: Separation chymotrypsinogen A, cytochrom C and lysozyme
Microscopic evaluation: Uniform spherical particles,no agglomerates, no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 1 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 110 - 150 mg/ml
Functional test (b:a): ≤ 0.4
Functional test (c:d): ≤ 0.45
Functional test: Separation chymotrypsinogen A, cytochrom C and lysozyme
法律資訊
FRACTOGEL is a registered trademark of Merck KGaA, Darmstadt, Germany
未找到適合的產品?
試用我們的產品選擇工具.
訊號詞
Warning
危險聲明
危險分類
Flam. Liq. 3
儲存類別代碼
3 - Flammable liquids
水污染物質分類(WGK)
WGK 1
閃點(°F)
95.0 °F
閃點(°C)
35 °C
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
客戶也查看了
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務