推薦產品
材料
colorless wells
polycarbonate (medical grade)
無菌
non-sterile
特點
lid
包裝
pack of 6 ea
製造商／商標名
Scaffdex C00005N
尺寸
96 wells
有效容積
170-200 μL
尋找類似的產品？ 前往 產品比較指南
一般說明
CellCrown 是一种一次性插件，可将样品固定在 6、12、24、48 和 96 孔板上。可以使用 CellCrown 将纤维、箔、膜、织物、组织和块状样品固定在孔中一个牢固的、可调节的位置。在更换培养基的过程中，可通过在孔壁和 CellCrown 插件之间进行移液，从而将样品留在孔中。使用 CellCrown 时，培养板的盖子是可以关闭的。该插件可以从孔板中取出，并在细胞培养后将其卸载，而不会损坏样品。CellCrown 由医用聚碳酸酯制成，产品线包括即用型无菌产品以及需要用户灭菌的非无菌产品。可以通过伽马射线或电子束辐射、高压灭菌、环氧乙烷气体和等离子灭菌进行灭菌。
灭菌条件：
温度....... 121°C/250°F
时间.................. 15 分钟
干燥时间......... 15 分钟
灭菌条件：
温度....... 121°C/250°F
时间.................. 15 分钟
干燥时间......... 15 分钟
CellCrown 96 is a unique and novel cell culture insert for standard 96 well plates. This is the first insert in the market, which allows easy attachment of thicker samples, up to 2 mm in the insert. Also attachment of rigid samples is possible between the holding cup and insert part.
Holding cup can be used alone and it prevents attachment of the sample to the bottom of the well. Insert part can be placed two ways in deeper and higher position. When two holes on the edge of cup and cusps in the inner part are matching the insert is suitable for thin samples. When they are not in the same position, combination is suitable for samples of 2 mm in thickness. Please note that fit of cup and inner part is slightly looser in this position and insert need to be handled with care.
After installation of the samples cups are cut off from their frame and the insert is ready to be used in well plate. It is also possible to use shorter pieces than row of 8 inserts. The round portions between inserts allow clear markings for identification of the samples. During cell culturing it is important to follow the sufficient level of cell culture media in wells. For CellCrown 96 the recommended amount of media in well is 170 - 200 μl, depending on size of the sample.
CellCrown 96 inserts are transparent in color, dark version was used for photographing for clearer images.
Holding cup can be used alone and it prevents attachment of the sample to the bottom of the well. Insert part can be placed two ways in deeper and higher position. When two holes on the edge of cup and cusps in the inner part are matching the insert is suitable for thin samples. When they are not in the same position, combination is suitable for samples of 2 mm in thickness. Please note that fit of cup and inner part is slightly looser in this position and insert need to be handled with care.
After installation of the samples cups are cut off from their frame and the insert is ready to be used in well plate. It is also possible to use shorter pieces than row of 8 inserts. The round portions between inserts allow clear markings for identification of the samples. During cell culturing it is important to follow the sufficient level of cell culture media in wells. For CellCrown 96 the recommended amount of media in well is 170 - 200 μl, depending on size of the sample.
CellCrown 96 inserts are transparent in color, dark version was used for photographing for clearer images.
法律資訊
CellCrown is a trademark of Scaffdex Oy
客戶也查看了
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務