TRD3D0026

Shogun superior PLA 3D printing filament

natural, diam. 1.75 mm

• 分類程式碼代碼: 23261601
• NACRES: NA.23

屬性

• 環保替代產品特色: Waste Prevention; Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• 直徑: 1.75 mm
• 重量: 1 kgeach
• 環保替代類別: , Enabling

描述

一般說明

Shogun Superior PLA for heat resistance and toughness

• Shogun can withstand high temperatures up to 90 °C without losing its shape.
• Up to 20% more impact resistant than conventional PLA.
• A truly biodegradable polymer according to EN13432 rule.
• Printability is comparable to the standard PLA with no warping and no heated bed required.

Material Properties

• Density: 1.3 g/cm3
• IZOD impact strength notched 23 °C: 50L/m
• Tensile elongation at yield: 38 Mpa
• Tensile elongation at break: >10%
• Heat deflection temperature: 90 °C

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with " Waste prevention" and "Design for energy efficency". Architectural 3D printing allows for design and print of more complex designs with little or no wastage. It is environmentally friendly.Click here for more information.

應用

Shogun Superior PLA 3D Printing Parameters

• Extruder (nozzle) temperature: 190 +/-10 °C
• Bed temperature: cold to 90 °C
• Print speed: 60-70 mm/s
• Fan: 0-20 %
• Minimum nozzle diameter: 0.3 mm
• Plate materials: blue tape

This product can be used in material extrusion 3D printing technique.

安全資訊

• 儲存類別代碼: 11 - Combustible Solids
• 水污染物質分類（WGK）: WGK 3
• 閃點（°F）: Not applicable
• 閃點（°C）: Not applicable