跳轉至內容
Merck
全部照片(1)

Key Documents

791539

Sigma-Aldrich

Titania paste, reflector

同義詞:

Greatcell Solar® WER2-O, TiO2 paste

登入查看組織和合約定價


About This Item

MDL號碼:
分類程式碼代碼:
12352103
PubChem物質ID:
NACRES:
NA.23

描述

Crystal Structure: > 99% anatase (analysis carried out on starting material, prior to paste manufacture)

形狀

paste (white)

濃度

20.0 wt. % (+/- 1.2 wt%)

樣品平均尺寸

150-250 nm (scatter)

黏度

15000-25000 mPa.s (Analysis carried out with 20mm 4 degree cone/plate; 40 s-1)

InChI

1S/2O.Ti

InChI 密鑰

GWEVSGVZZGPLCZ-UHFFFAOYSA-N

一般說明

Titania paste, the reflector is a precursor for titania, that forms a mesoporous light scattering layer on the fluorine doped tin oxide (FTO) substrates. It is used in a variety of electrochemical devices to improve electron mobility and power efficiency.

應用

Light scattering titania paste can be coated on the primary transparent layer of TiO2 to form a bilayered titanium film. It can be used as a negative electrode for dye sensitized solar cells (DSSCs).
Scattering Reflector Titania Paste can be used in conjunction with Transparent Titania Paste for enhanced DSSC performance in applications where transparency is not required.
Scattering Titania Paste contains highly dispersed anatase scattering particles (150nm to 250nm). This paste produces a non-active scattering layer when applied onto a pre-printed active layer.
After drying; this paste must be fired – together with the pre-printed active layers – at or above 500°C. This results in an opaque sintered layer; with a thickness of ~3μm for one printed layer; when using a 90T mesh screen.

Storage: Store in the dark at 20°C

法律資訊

Product of Greatcell Solar® exclusive supplier of Sun2 products under license from EPFL.
Greatcell Solar® is a registered trademark of Greatcell Solar
Greatcell Solar is a registered trademark of Greatcell Solar

象形圖

Exclamation mark

訊號詞

Warning

危險聲明

危險分類

Eye Irrit. 2 - Skin Irrit. 2

儲存類別代碼

10 - Combustible liquids

水污染物質分類(WGK)

WGK 1

閃點(°F)

195.8 °F

閃點(°C)

91 °C


分析證明 (COA)

輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。

已經擁有該產品?

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

Pt-free spray coated reduced graphene oxide counter electrodes for dye sensitized solar cells
Nagavolu C, et al.
Solar Energy, 137(11), 143-147 (2016)
Band engineered ternary solid solution CdS x Se 1- x-sensitized mesoscopic TiO 2 solar cells
Hossain MA, et al.
Physical Chemistry Chemical Physics, 14(19), 7154-7161 (2012)
Electrical and photophysical analyses on the impacts of arylamine electron donors in cyclopentadithiophene dye-sensitized solar cells
Xu M, et al.
Energy & Environmental Science, 4(11), 4735-4742 (2011)
CdSe-sensitized mesoscopic TiO 2 solar cells exhibiting> 5% efficiency: redundancy of CdS buffer layer
Hossain MA, et al.
Journal of Materials Chemistry, 22(32), 16235-16242 (2012)
Joint electrical, photophysical and computational studies on D-pi-A dye sensitized solar cells: the impacts of dithiophene rigidification
Xu M, et al.
Chemical Science, 3(4), 976-983 (2012)

文章

Few Monolayer Atomic Layer Deposition (ALD) on Surfaces and Interfaces for Energy Applications

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm2.2

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

查看全部

我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務