推薦產品
蒸汽密度
>1 (vs air)
蒸汽壓力
<0.3 mmHg ( 20 °C)
分子量
average Mn ~14,600
成份
PEG, 82.5 wt. %
pH值
6.0-7.4 (2.5% in H2O)
表面張力
41 dyn/cm, 25 °C, 0.1 wt. % in H2O
黏度
2,800 cP(77 °C, Brookfield)(lit.)
轉變溫度
cloud point >100 °C (1 wt. % aqueous solution)
Tm (DSC) 60 °C (at peak)
HLB
>24.0
InChI
1S/C3H6O.C2H4O/c1-3-2-4-3;1-2-3-1/h3H,2H2,1H3;1-2H2
InChI 密鑰
RVGRUAULSDPKGF-UHFFFAOYSA-N
尋找類似的產品？ 前往 產品比較指南
一般說明
Pluronic® F108 是三嵌段共聚物和末端伯二羟基官能低聚物。它表现为非离子表面活性剂。它是表面活性材料，其性质取决于亲水（EO）/疏水（PO）比。高 EO 含量可提供更好的 o/w 稳定剂。
應用
Pluronic® F108 在培养基中用作表面活性剂，以防止细胞粘附到微流体装置的表面。{7}-{11} Pluronic 可能是有用的病原体检测器。它被用于分析微生物群落和基因分型单核苷酸多态性（SNPs）。{9}三嵌段共聚物被用作孔模板，用于制造多孔碳和碳/二氧化硅复合材料。{10}
软硬表面清洁剂、涂料和水处理中的消泡剂。金属加工润滑剂，线性和交联聚酯及聚氨酯的消泡助剂和增量剂。
特點和優勢
性质取决于亲水性 (EO)/疏水性 (PO) 比例的表面活性物质EO 含量越高，水包油稳定剂性能越好。
外觀
末端主要是二羟基官能化低聚物。
法律資訊
Pluronic is a registered trademark of BASF
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 1
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。
客戶也查看了
Özden Baltekin et al.
Proceedings of the National Academy of Sciences of the United States of America, 114(34), 9170-9175 (2017-08-10)
The emergence and spread of antibiotic-resistant bacteria are aggravated by incorrect prescription and use of antibiotics. A core problem is that there is no sufficiently fast diagnostic test to guide correct antibiotic prescription at the point of care. Here, we
Agnes Miermont et al.
Scientific reports, 9(1), 13782-13782 (2019-09-26)
The maintenance of precise cell volume is critical for cell survival. Changes in extracellular osmolarity affect cell volume and may impact various cellular processes such as mitosis, mitochondrial functions, DNA repair as well as cell migration and proliferation. Much of
Yvonne Zagzag et al.
Scientific reports, 10(1), 1932-1932 (2020-02-08)
We demonstrate that holographic particle characterization can directly detect binding of proteins to functionalized colloidal probe particles by monitoring the associated change in the particles' size. This label-free molecular binding assay uses in-line holographic video microscopy to measure the diameter
Eric Parigoris et al.
Advanced healthcare materials, 10(4), e2000810-e2000810 (2020-06-26)
This paper describes mammary organoids with a basal-in phenotype where the basement membrane is located on the interior surface of the organoid. A key materials consideration to induce this basal-in phenotype is the use of a minimal gel scaffold that
Wontae Lee et al.
Nature communications, 10(1), 144-144 (2019-01-13)
Understanding how forces orchestrate tissue formation requires technologies to map internal tissue stress at cellular length scales. Here, we develop ultrasoft mechanosensors that visibly deform under less than 10 Pascals of cell-generated stress. By incorporating these mechanosensors into multicellular spheroids
文章
Mesoporous materials are formed by a self-assembly process from combined solutions of sol-gel precursors (e.g., metal alkoxides) and structure-directing amphiphiles, usually block-copolymers or surfactants.
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務