推薦產品
品質等級
化驗
99.7% trace metals basis
形狀
foil
自燃溫度
860 °F
電阻係數
42.0 μΩ-cm, 20°C
厚度
0.127 mm
bp
3287 °C (lit.)
mp
1660 °C (lit.)
密度
4.5 g/mL at 25 °C (lit.)
應用
battery manufacturing
SMILES 字串
[Ti]
InChI
1S/Ti
InChI 密鑰
RTAQQCXQSZGOHL-UHFFFAOYSA-N
應用
钛基箔可用于阳极氧化工艺以制造钛纳米管（TNT），其可进一步用于太阳能电池和其他传感器应用。
數量
150 × 150 mm（约 13 g）
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
nwg
閃點（°F）
Not applicable
閃點（°C）
Not applicable
個人防護裝備
Eyeshields, Gloves, type N95 (US)
客戶也查看了
Fabrication of high aspect ratio and open-ended TiO2 nanotube photocatalytic arrays through electrochemical anodization
Wong RJ, et al.
AIChE Journal, 62(2), 415-420 (2016)
A new approach to electropolishing of pure Ti foil in acidic solution at room temperature for the formation of ordered and long TiO2 nanotube arrays
Asgari V, et al.
Corrosion Science, 136(6), 38-46 (2018)
Rapid TiO 2 Nanotubes Formation in Aged Electrolyte and Their Application as Photocatalysts for Cr (VI) Reduction Under Visible Light
Zulkifli MA, et al.
Nanotechnology, IEEE Transactions, 17(6), 1106-1110 (2018)
N-doped TiO 2 nanotubes coated with a thin TaO x N y layer for photoelectrochemical water splitting: dual bulk and surface modification of photoanodes
Kim H, et al.
Energy & Environmental Science, 8(1), 247-257 (2015)
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
文章
Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務