推薦產品
蒸汽壓力
<0.01 mmHg ( 25 °C)
<1 mmHg ( 20 °C)
分子量
average Mn ~1,000
包含
0.05-0.07% BHT as stabilizer
mp
25-33 °C
密度
0.974 g/mL at 25 °C
SMILES 字串
OCCCCO
InChI
1S/C8H18O2/c1-3-5-6-10-8(4-2)7-9/h8-9H,3-7H2,1-2H3/t8-/m0/s1
InChI 密鑰
BJZYYSAMLOBSDY-QMMMGPOBSA-N
尋找類似的產品？ 前往 產品比較指南
應用
聚四氢呋喃可作为起始原料用于制备：
- 热可逆性氨基甲酸乙酯-环氧化物网络。
- 通过熔融缩聚制备的具有形状记忆效应的聚六亚甲基2,6-萘甲酸酯)-b-聚（四氢呋喃）（PHN-b-N-pTHF）嵌段共聚物。
- 用于制造记忆有机电化学晶体管的聚（3,4-乙烯二氧噻吩）聚（四氢呋喃）复合材料。
特點和優勢
- 高弹性
- 水解稳定性
- 良好的耐磨性
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 3
閃點（°F）
>325.4 °F - Tag open cup
閃點（°C）
> 163 °C - Tag open cup
個人防護裝備
dust mask type N95 (US), Eyeshields, Gloves
M Renier et al.
Journal of biomaterials science. Polymer edition, 5(3), 231-244 (1993-01-01)
Poly(etherurethane urea) (PEUU) elastomers when employed as biomedical devices may be susceptible to extraction upon implantation. Four PEUU elastomers containing a single PEUU formulation, but varying in terms of their additives, were subjected to an in vitro extraction procedure. The
P Banu et al.
Journal of colloid and interface science, 277(2), 304-308 (2004-09-03)
Aqueous dispersions of poly(ester-imide)s [P(E-I)s] have been prepared by dispersing the P(E-I)s in water without any external solubilizing agents. P(E-I)s were prepared from anhydride-terminated polyester prepolymer and diisocyanate. The -COOH groups in the polymer were then neutralized using triethylamine and
A Takahara et al.
Journal of biomaterials science. Polymer edition, 5(3), 183-196 (1993-01-01)
The relationships among surface, bulk properties and lipid sorption behaviors of segmented polyurethanes (SPUs) with various polyol soft segments were investigated. The polyols used in this study were poly(ethylene oxide) (PEO), poly(tetramethylene oxide) (PTMO), and poly(dimethylsiloxane) (PDMS). The hard segment
Antony Memboeuf et al.
Journal of the American Society for Mass Spectrometry, 22(10), 1744-1752 (2011-09-29)
Collision induced dissociation tandem mass spectrometry experiments were performed to unequivocally separate compounds from an isobaric mixture of two products. The Survival Yield curve was obtained and is shown to consist in a linear combination of the curves corresponding to
W K Loke et al.
Biomaterials, 17(22), 2163-2172 (1996-11-01)
Hybrid biomaterials have been produced by the interaction of polyurethane oligomers with both fresh and glutaraldehyde-fixed porcine pericardium. The hybrid biomaterials so formed were translucent with occasional white streaks and/or spots, had increased stiffness (to touch) but remained pliable. No
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務