推薦產品
化驗
95%
形狀
liquid
包含
200-300 ppm MEHQ as inhibitor
折射率
n20/D 1.456 (lit.)
bp
132-134 °C/4 mmHg (lit.)
密度
1.023 g/mL at 25 °C (lit.)
儲存溫度
2-8°C
SMILES 字串
CC(=C)C(=O)OCCCCOC(=O)C(C)=C
InChI
1S/C12H18O4/c1-9(2)11(13)15-7-5-6-8-16-12(14)10(3)4/h1,3,5-8H2,2,4H3
InChI 密鑰
XOJWAAUYNWGQAU-UHFFFAOYSA-N
尋找類似的產品？ 前往 產品比較指南
應用
- 1,4-BDDMA水泡状乳剂的配方及聚合：本研究的重点是1,4-丁二醇二甲基丙烯酸酯（1,4-BDDMA）在水乳液中的配方和聚合过程，展示了其在制造适用于各种工业应用的高性能聚合物泡沫方面的潜力（Dabrowski et al., 2020）。
- 甲基丙烯酸酯基聚合物泡沫具有可控制的连通性、孔隙形状、孔径大小和多分散性：该研究深入研究了使用1,4-BDDMA制造甲基丙烯酸酯基聚合物泡沫，强调了其在生产具有定制物理特性的材料方面的多功能性，这对生物医学和工业用途至关重要（Dabrowski et al., 2019）。
- 二氧化硅胶体晶体膜的双重复制：本文讨论了使用1,4-BDDMA复制二氧化硅胶体晶体薄膜，强调了其在为先进技术应用创建结构化材料方面的功效（Russell and Mallouk, 2017）。
- 基于聚丁二烯/多面体低聚硅氧烷的原位光交联纳米杂化弹性体：本研究研究了使用1,4-BDDMA的纳米杂化弹性体的开发，重点研究了其在医疗器械粘合剂和高性能聚合物合成中的应用（Mirmohammadi et al., 2016）。
- 甲基丙烯酸酯对牙髓细胞耗氧量和氧化还原状态的影响：研究强调了1,4-BDDMA的生物相容性和潜在的牙科应用，证明了它对人类牙髓细胞的影响，这对牙科复合材料至关重要（Nocca et al., 2014）。
訊號詞
Warning
危險分類
Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT SE 3
標靶器官
Respiratory system
儲存類別代碼
10 - Combustible liquids
水污染物質分類（WGK）
WGK 1
閃點（°F）
235.4 °F - closed cup
閃點（°C）
113 °C - closed cup
個人防護裝備
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。
客戶也查看了
M Krishna Kumar et al.
Journal of peptide science : an official publication of the European Peptide Society, 8(5), 183-191 (2002-06-05)
A highly solvating copolymer was prepared in high yield by introducing a flexible crosslinker, 1,4-butanedioldimethacrylate, into the polystyrene matrix by a free radical aqueous suspension polymerization. A 2 mol% crosslinked resin showed rigidity and mechanical characteristics comparable to those of
Giuseppina Nocca et al.
Luminescence : the journal of biological and chemical luminescence, 23(1), 54-57 (2008-01-05)
In the last years the studies regarding the biocompatibility of dental materials investigate, in addition to the classic cytotoxic tests, the interactions between the materials and the host cells to better explain the causes of the adverse effects observed sometimes
Susanna Segerström et al.
European journal of oral sciences, 113(5), 422-428 (2005-10-06)
Two matrix resins for fiber composites that remain in a fluid state during storage and handling before polymerization were evaluated. The resin mixtures, based on methyl methacrylate (MMA), were produced with two different cross-linking agent systems: 1,4-butanediol dimethacrylate and ethylene
Susanna Segerström et al.
European journal of oral sciences, 119(3), 246-252 (2011-05-14)
The aim of this study was to determine water sorption, water solubility, dimensional change caused by water storage, residual monomers, and possible cytotoxic effects of heat-polymerized carbon-graphite fibre-reinforced composites with different fibre loadings based on methyl methacrylate/poly(methyl methacrylate) (MMA/PMMA) and
Aude Heloise Bonardi et al.
Macromolecular rapid communications, 40(23), e1900495-e1900495 (2019-10-31)
Photo-induced thermal polymerization upon near-infrared (NIR) light irradiation has been reported in the literature. In this approach, a component able to convert the NIR light into heat must be used in combination with a thermal initiator to initiate the free-radical
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務