推薦產品
自燃溫度
580 °F
品質等級
雜質
may contain ≤2.0% toluene
折射率
n20/D 1.49
固有黏度
0.20 dL/g(lit.)
轉變溫度
Tg (DSC) 105 °C (midpoint)
溶解度
H2O: insoluble
密度
1.188 g/mL at 25 °C
InChI
1S/C5H9O2/c1-4(2)5(6)7-3/h1-3H3
InChI 密鑰
PMAMJWJDBDSDHV-UHFFFAOYSA-N
尋找類似的產品？ 前往 產品比較指南
一般說明
聚（甲基丙烯酸甲酯）（PMMA）是无定形、透明的热塑性聚合物。PMMA 的折射率为 1.49 ，因而被认为是光学聚合物。因此，它被用于光纤。由于其较低的吸水能力和生物相容性，它在生物应用中得到应用。PMMA 的最大含水量为 1.71％，SBF 吸收率为 1.96％。模拟体液试验（SBF）是一种通过将材料浸入 SBF 水溶液中来表征陶瓷材料的体外生物活性的方法。
應用
PMMA/HA（羟基磷灰石）复合材料已经用于生物医学应用，例如牙科、矫形保持器和骨替代物。它用作石墨烯生长的基质。
一些研究报告它用于
PMMA-二氧化钛杂化光学薄膜
PMMA /聚苯乙烯/粘土纳米复合材料
用于甲醇燃料电池的 PMMA /聚氨酯/炭黑纳米复合材料
一些研究报告它用于
PMMA-二氧化钛杂化光学薄膜
PMMA /聚苯乙烯/粘土纳米复合材料
用于甲醇燃料电池的 PMMA /聚氨酯/炭黑纳米复合材料
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 2
個人防護裝備
Eyeshields, Gloves, type N95 (US)
客戶也查看了
Jian-Chiun Liou et al.
Nanoscale research letters, 9(1), 1-1 (2014-01-02)
In this study, the Mo-electrode thin films were deposited by a two-stepped process, and the high-purity copper indium selenide-based powder (CuInSe2, CIS) was fabricated by hydrothermal process by Nanowin Technology Co. Ltd. From the X-ray pattern of the CIS precursor
High-refractive-index thin films prepared from trialkoxysilane-capped poly (methyl methacrylate)-titania materials
Lee LH, et al.
Chemistry of Materials, 13(3), 1137-1142 (2001)
Synthesis of Ethylene Glycol Dimethacrylate-Methyl Methacrylate Copolymers, Determination of their Reactivity Ratios, and a Study of Dopant and Temperature Effects on their Conductivities
Ramelow US and Pingili S
Polymer, 2(3), 265-285 (2010)
Poly (methyl methacrylate) and polystyrene/clay nanocomposites prepared by in-situ polymerization.
Zeng C and Lee LJ
Macromolecules, 34(12), 4098-4103 (2001)
Tugba Ozdemir et al.
Scientific reports, 9(1), 1001-1001 (2019-02-01)
Fibrous scaffolds are used for bone tissue engineering purposes with great success across a variety of polymers with different physical and chemical properties. It is now evident that the correct degree of curvature promotes increased cytoskeletal tension on osteoprogenitors leading
文章
Professor Aran (Claremont University, USA) thoroughly discusses the engineering of graphene based materials through careful functionalization of graphene oxide, a solution processable form of graphene.
Developed in the last several years, fluorescence quenching microscopy (FQM) has enabled rapid, inexpensive, and high-fidelity visualization of two-dimensional (2D) materials such as graphene-based sheets and MoS2.
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務