推薦產品
品質等級
化驗
98%
形狀
solid
bp
180 °C/16 mmHg (lit.)
mp
32-38 °C (lit.)
溶解度
chloroform: soluble 10%, clear to very slightly hazy, colorless to faintly yellow
密度
1.487 g/mL at 25 °C (lit.)
SMILES 字串
ClC(=O)c1cc(cc(c1)C(Cl)=O)C(Cl)=O
InChI
1S/C9H3Cl3O3/c10-7(13)4-1-5(8(11)14)3-6(2-4)9(12)15/h1-3H
InChI 密鑰
UWCPYKQBIPYOLX-UHFFFAOYSA-N
尋找類似的產品? 前往 產品比較指南
一般說明
1,3,5-苯三甲酰氯与炔丙醇反应生成三丙基-2-炔基苯-1,3,5-三羧酸酯。
應用
1,3,5-苯三甲酰氯用于合成手性偶氮芳族树枝状聚合物体系。用它来研究含有机磷萃取剂作为载体的活化复合膜的结构。它是从 3-和 4-甲基氨基吡啶合成的两种三元酰胺的起始原料,其在用硝酸钯(II) DMSO 溶液处理时自组装成纳米球。
訊號詞
Danger
危險聲明
危險分類
Eye Dam. 1 - Skin Corr. 1B - Skin Sens. 1
儲存類別代碼
8A - Combustible corrosive hazardous materials
水污染物質分類(WGK)
WGK 3
閃點(°F)
230.0 °F - closed cup
閃點(°C)
110 °C - closed cup
個人防護裝備
Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges
客戶也查看了
Scientific reports, 8(1), 784-784 (2018-01-18)
The development of nano-enabled composite materials has led to a paradigm shift in the manufacture of high-performance nanocomposite membranes with enhanced permeation, thermo-mechanical, and antibacterial properties. The major challenges to the successful incorporation of nanoparticles (NPs) to polymer films are
Environmental science & technology, 52(16), 9341-9349 (2018-07-26)
Conventional thin-film composite (TFC) membranes suffer from the trade-off relationship between permeability and selectivity, known as the "upper bound". In this work, we report a high performance thin-film composite membrane prepared on a tannic acid (TA)-Fe nanoscaffold (TFCn) to overcome
ACS applied materials & interfaces, 9(8), 7523-7534 (2017-02-12)
Zirconiumv (IV)-carboxylate metal-organic framework (MOF) UiO-66 nanoparticles were successfully synthesized and incorporated in the polyamide (PA) selective layer to fabricate novel thin-film nanocomposite (TFN) membranes. Compared to unmodified pure polyamide thin-film composite (TFC) membranes, the incorporation of UiO-66 nanoparticles significantly
Journal of colloid and interface science, 552, 418-425 (2019-06-01)
This study reports highly permeable ultrathin film composite (uTFC) membranes whose rejection layer was reinforced by polymer chains during the interfacial polymerization of trimesoyl chloride (TMC) and m-phenylenediamine (MPD) to achieve enhanced salt rejection. A rejection layer of approximately 20 nm
Scientific reports, 8(1), 10022-10022 (2018-07-04)
A low-cost sulfonated polysulfone (SPSU)/poly(vinyl chloride) (PVC) substrate based high-performance thin-film composite (TFC) forward osmosis (FO) membrane was fabricated in this work. The results showed that the morphologies of the substrates were looser and more porous, and the porosity, pure
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務