21099-U

GC Stationary Phase

phase SE-30, bottle of 10 g

• UNSPSC Code: 23151817
• NACRES: SB.54

Properties

• Agency: meets requirements for USP G2
• packaging: bottle of 10 g
• parameter: temp. range at 50-300 °C
• technique(s): gas chromatography (GC): suitable
• matrix active group: SE-30 phase
• solubility: chloroform: soluble
• column type: packed GC

Description

General description

GC methods are divided into two classes depending on the nature of stationary phases; gas-solid chromatography (GSC) and gas-liquid chromatography (GLC). GSC has solid adsorptive material and solute particles are removed from mobile phase by electrostatic forces. GLC has a thin layer of liquid coated or bonded on the surface of an inert particle or on the walls of the column where solute particles are retained in the liquid phase based on their partition coefficients. The primary necessity of a stationary phase is to provide sample separation sustaining phase integrity over a reasonable period of time. It should be stable for the chemical and thermal changes. Selectivity, peak symmetry, analysis time, degree of separation, peak tailing are a few parameters that should be considered before choosing a stationary phase. SE-30 is a dimethyl silicone elastomer. It is widely suitable as liquid phase got GLC.

Synthesized specifically to be purer, of narrow molecular weight range, and without trace catalysts or impurities for use as a GC stationary phase.

Application

SE-30 was used as stationary phase for the analysis of the thiohydantoins using GC. It may also be used as liquid phase in identification of the single polychlorinated biphenyls (PCB) components by comparing their retention indices, using high-resolution thin-film glass capillary gas chromatography coupled with electron-capture detector.

Safety Information

• Storage Class Code: 10 - Combustible liquids
• WGK: WGK 3
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable
• Personal Protective Equipment: dust mask type N95 (US), Eyeshields, Gloves