1.52063

Chromolith^® RP-18封端

L × I.D. 100 mm x 3 mm HPLC columns Validation Kit (3 columns from 3 different batches)

• 别名: Chromolith^® RP-18 endcapped 100-3 HPLC columns Validation Kit (3 columns from 3 different batches)
• 分類程式碼代碼: 41115700

属性

• 材料: PEEK column
• 品質等級: 100
• agency: suitable for USP L1
• 產品線: Chromolith^®
• 特點: endcapped
• 包裝: pkg of 3 ea
• 標籤範圍: 18% Carbon loading
• 參數: 200 bar pressure; 45 °C max. temp.
• 技術: HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High)
• 柱長度 × 內徑: 10 cm × 3 mm
• 基質: monolithic silica
• 基質活性組: C18 bonding phase
• 孔徑: 13 nm mesoporosity; 2 μm macroporosity
• 工作pH值範圍: 2-7.5
• 分離技術: reversed phase
• 儲存溫度: no temp limit

说明

一般說明

Chromolith^® RP-18 endcapped 100-3 HPLC columns Validation Kit consists of 3 columns from 3 different manufacturing batches.
Chromolith^® columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® Performance RP-18 endcapped 100-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith^® Performance RP-18 endcapped 100-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith^® Performance RP-18 endcapped 100-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 100 mm length and 3 mm I.D. is the best choice for fast separations of complex samples on any HPLC and UHPLC System.

The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity

The recommended Guard-columns are:
Chromolith^® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith^® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith^® column coupler can be used to significantly increase the separation efficiency of Chromolith^® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]

Learn more:
Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns

All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument

法律資訊

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany