TRD3D0060

Tenax PC-ABS 3D Printing Filament

signal white, diam. 1.75 mm

• 分類程式碼代碼: 12352203
• NACRES: NA.23

属性

• 環保替代產品特色: Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• 直徑: 1.75 mm
• 重量: 500 geach
• 環保替代類別: Enabling,

说明

一般說明

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Tenax PC-ABS printing filament has high mechanical strength and toughness with odourless composition and low wrapping. Click here for more information.

Tenax PC-ABS 3D Printing Filament:

• Odourless composition and low warping
• Very high mechanical strenghth and toughness
• Obtain a shiny finish
• Certified for automotive

Material Properties

• Density: 1.1 g/cm3
• Water absorption: 0.9%
• Tensile modulus: 2000 MPa
• Tensile stress: 43 MPa
• Tensile strain at break: 90%
• Vicat point: 108°C
• Heat deflection: 93°C
• Charpy notched impact at 23°C: 50 kJ/m2
• Charpy notched impact at -30°C: 50 kJ/m2

應用

This product can be used in material extrusion 3D printing technique.

Tenax PC-ABS 3D Printing Parameters

• Extruder (nozzle) temperature: 250 +/- 10 °C
• Bed temperature: 100 +/- 10 °C
• Print speed: 50-60 mm/s
• Fan: 0-20 %
• Minimum nozzle diameter: 0.4 mm
• Plate materials: blue tape, kapton tape, etc.

安全信息

• 儲存類別代碼: 11 - Combustible Solids
• 水污染物質分類（WGK）: WGK 3
• 閃點（°F）: Not applicable
• 閃點（°C）: Not applicable