921912

3D Printable Ultra-High Temperature Boron Carbide Ink

• 别名: 3D Printable B₄C Ink, Direct-Ink-Writable B₄C Ink
• 经验公式（希尔记法）: B₄C
• CAS号: 12069-32-8
• 分子量: 55.25
• 分類程式碼代碼: 12162002
• NACRES: NA.23

属性

• 描述: Printing methods compatible with: Direct-Ink-Writing 3D printing
• 品質等級: 100
• 形狀: paste
• 環保替代產品特色: Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• 濃度: 50 % (v/v) (Boron carbide)
• 顏色: gray
• 平均粒徑: 1.8 μm
• 黏度: 10-103 Pa.s (25 °C at 100 s^-1)
• 環保替代類別: Enabling,
• 儲存溫度: 2-8°C
• InChI: 1S/CB4/c2-1-3(2)5(1)4(1)2
• InChI 密鑰: INAHAJYZKVIDIZ-UHFFFAOYSA-N

说明

一般說明

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Green Chemistry. This product has been enhanced for energy efficiency. Click here for more information.

應用

This product can be used in material extrusion 3D printing technique.

This product is a thixotropic ink based on boron carbide (B₄C) microparticles. It is suitable for various direct ink write (aka robocasting) printing technologies. The ink offers a stable dispersion of B₄C, high viscosity, good printability, and long shelf life (when stored in an airtight sealed container). Sintered patterns provide excellent thermal stability and hardness. The ink is suitable for applications such as heat exchanges, high wear components, components in extreme temperature environments, etc.

儲存和穩定性

Handeling tips:
Store in an airtight sealed container in refrigerator.
Avoid exposure to heat.


Step-by-Step procedure for ink mixing and loading into syringe is in attached file.


Storage:
Store in an airtight sealed container in refrigerator, do not freeze
Avoid exposure to heat
Mix well by hand or in a planetary mixer (preferred) before usage.

安全信息

• 象形圖: GHS07
• 訊號詞: Warning
• 危險聲明: H317
• 防範說明: P261 - P272 - P280 - P302 + P352 - P333 + P313 - P362 + P364
• 危險分類: Skin Sens. 1
• 儲存類別代碼: 10 - Combustible liquids
• 水污染物質分類（WGK）: WGK 1