跳转至内容
Merck

791547

Sigma-Aldrich

二氧化钛浆料,透明

别名:

Greatcell Solar®, 二氧化钛浆料

登录查看公司和协议定价


About This Item

MDL號碼:
分類程式碼代碼:
12352103
PubChem物質ID:
NACRES:
NA.23

描述

Crystal Structure: > 99% anatase (analysis carried out on starting material, prior to paste manufacture)

形狀

paste (yellow)

濃度

19.0 wt. %

樣品平均尺寸

20 nm (active)

黏度

40000-55000 mPa.s(20 °C) (Analysis carried out at 20°C with 20mm 4 degree cone/plate; 40 s-1))

InChI

1S/2O.Ti

InChI 密鑰

GWEVSGVZZGPLCZ-UHFFFAOYSA-N

一般說明

透明二氧化钛(TiO2)浆料是一种具有较大表面积体积比的可见透明浆料。浆料中TiO2纳米颗粒的平均直径为20nm,每一印刷层的透明烧结膜厚度大约为6-7μ米。

應用

TiO2浆料会形成丝网印刷膜,主要作为铟锡氧化物(ITO)或氟掺杂氧化锡(FTO)基衬底上的导电带,用于染料敏化太阳能电池和主要光伏应用。
在需要具有较大表面积/体积比的透明烧结二氧化钛薄膜的应用中使用透明二氧化钛膏。

当使用 43T 筛网印刷时,配制透明二氧化钛浆料,以获得厚度为 6-7 μm 的烧结薄膜。透明二氧化钛糊剂具有高度分散和稳定的锐钛矿纳米颗粒。

它的优化丝网印刷使用一个合成的 43T 网状网(或类似的)。干燥后,该糊剂必须在 500°C 或 500°C 以上温度下烧结。当使用 43T 筛网时,得到透明烧结层;一个打印层膜厚度约为 6-7 μm,两个打印层膜厚度约为 12 μm。

该糊剂表现出最佳的流变属性,提供了良好的表面均匀性,并含有特别配制的有机粘合剂,以提供适用于一系列染料/电解质系统的通用多孔性。

保存:20°C 避光保存

法律資訊

Greatcell Solar Materials Pty Ltd.的产品Greatcell Solar是 Greatcell Solar Materials Pty Ltd.的注册商标。
Greatcell Solar is a registered trademark of Greatcell Solar

象形圖

Exclamation mark

訊號詞

Warning

危險聲明

危險分類

Eye Irrit. 2 - Skin Irrit. 2

儲存類別代碼

10 - Combustible liquids

水污染物質分類(WGK)

WGK 1

閃點(°F)

195.8 °F - closed cup

閃點(°C)

91 °C - closed cup


分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ (Lot或Batch)字后找到。

已有该产品?

在文件库中查找您最近购买产品的文档。

访问文档库

其他客户在看

Slide 1 of 2

1 of 2

An evidence for an organic N-doped multiwall carbon nanotube heterostructure and its superior electrocatalytic properties for promising dye-sensitized solar cells.
Arbab AA, et al
Journal of Materials Chemistry, 6(18), 8307-8322 (2018)
Studies on the efficiency enhancement of co-sensitized, transparent DSSCs by employment of core-shell-shell gold nanorods.
Zani L, et al.
Inorgorganica Chimica Acta, 470(1), 407-415 (2018)
Energy conversion efficiency of genipin-based dye sensitized solar cells.
AIP Conference Proceedings, 2003(1), 020012-020012 (2018)
Heather Vanselous et al.
The journal of physical chemistry letters, 8(4), 825-830 (2017-02-06)
Molecular monolayers exhibit structural and dynamical properties that are different from their bulk counterparts due to their interaction with the substrate. Extracting these distinct properties is crucial for a better understanding of processes such as heterogeneous catalysis and interfacial charge
Improving the morphology of the perovskite absorber layer in hybrid organic/inorganic halide perovskite MAPbI3 solar cells.
Ogundana IJ and Foo SY
Journal of Solar Energy, 2017(1), 10341-10341 (2017)

商品

Professor Shinar (Iowa State University, USA) summarizes the developments of a variety of sensor configurations based on organic and hybrid electronics, as low-cost, disposable, non-invasive, wearable bioelectronics for healthcare.

Few Monolayer Atomic Layer Deposition (ALD) on Surfaces and Interfaces for Energy Applications

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm2.2

查看所有结果

我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门