跳转至内容
Merck

703192

Sigma-Aldrich

氧化铟锡涂层玻璃载玻片,方形

surface resistivity 8-12 Ω/sq

别名:

ITO, ITO 涂覆的正方形玻片

登录查看公司和协议定价


About This Item

线性分子式:
In2O3 · (SnO2)x
CAS号:
MDL號碼:
分類程式碼代碼:
12352103
PubChem物質ID:
NACRES:
NA.23

描述

slide

品質等級

表面阻抗

8-12 Ω/sq

長度 × 寬度 × 厚度

25 mm × 25 mm × 1.1 mm

透射率

84% (nominal at 550nm)

折射率

n20/D 1.517

SMILES 字串

O=[Sn]=O.O=[In]O[In]=O

InChI

1S/2In.5O.Sn

InChI 密鑰

LNNWKAUHKIHCKO-UHFFFAOYSA-N

正在寻找类似产品? 访问 产品对比指南

一般說明

氧化铟锡(ITO)广泛用作透明导电氧化物。其主要特征是导电性、光学透明性,并且易于沉积成薄膜。
衬底:未抛光浮法玻璃,SiO2 钝化(200-300Å)

應用

ITO玻璃载玻片可用作通过聚合物半导体与有机发光二极体(OLED)混合材料制备聚合物太阳能电池的基板。ITO基板也可用于通过印刷工具蚀刻基板表面来对透明加热器阵列进行设计。ITO盖玻片可用于封闭的数字微流体装置,并可用作显示器和其他光电装置中的透明电极。已报道的一些其他可能用途包括:
  • 在ITO覆盖的玻璃基底上制备真黑素样品。
  • 用于光束偏转(OBD)传感的液体电池的界面窗口包含一个20nm厚的氧化铟锡薄膜。
  • 在ITO导电玻璃上形成介孔TiO2 薄膜。

物理性質

ITO 涂层厚度为 1,200-1,600Å

儲存類別代碼

13 - Non Combustible Solids

水污染物質分類(WGK)

WGK 3

閃點(°F)

Not applicable

閃點(°C)

Not applicable

個人防護裝備

dust mask type N95 (US), Eyeshields, Gloves


从最新的版本中选择一种:

分析证书(COA)

Lot/Batch Number

没有发现合适的版本?

如果您需要特殊版本,可通过批号或批次号查找具体证书。

已有该产品?

在文件库中查找您最近购买产品的文档。

访问文档库

Keith A Brown et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(32), 12921-12924 (2013-07-19)
Scanning probe lithography (SPL) is a promising candidate approach for desktop nanofabrication, but trade-offs in throughput, cost, and resolution have limited its application. The recent development of cantilever-free scanning probe arrays has allowed researchers to define nanoscale patterns in a
Myungjae Yang et al.
Small (Weinheim an der Bergstrasse, Germany), 14(25), e1800885-e1800885 (2018-05-29)
A method is developed to directly map nanoscale "noise-source switching" phenomena during the optoelectronic switching of phase-separated polymer nanocomposites of tetrathiafulvalene (TTF) and phenyl-C61 -butyric acid methyl ester (PCBM) molecules dispersed in a polystyrene (PS) matrix. In the method, electrical
Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
Hanaul Noh et al.
Beilstein journal of nanotechnology, 8, 579-589 (2017-04-07)
Organic photovoltaic systems comprising donor polymers and acceptor fullerene derivatives are attractive for inexpensive energy harvesting. Extensive research on polymer solar cells has provided insight into the factors governing device-level efficiency and stability. However, the detailed investigation of nanoscale structures
Optical Fiber Refractometers based on Indium Tin Oxide Coatings with Response in the Visible Spectral Region
Zamarreno CR, et al.
Procedia Engineering, 25, 499-502 (2011)

商品

In this article, we demonstrate that bis-styrylbenzene derivatives show promising characteristics for very low lasing thresholds and discuss the design considerations for organic lasing molecules.

Professor Shinar (Iowa State University, USA) summarizes the developments of a variety of sensor configurations based on organic and hybrid electronics, as low-cost, disposable, non-invasive, wearable bioelectronics for healthcare.

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

Electronically, it behaves as a wide band gap (3.2 eV) semiconductor and exhibits memristor properties.2 Optically, TiO2 has high opacity with a very high refractive index3 (>2.4), and it exhibits strong absorbance in the UV range.

查看所有结果

我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门