推荐产品
品質等級
化驗
>95%
折射率
n20/D 1.531 (lit.)
bp
275 °C/1 mmHg (lit.)
密度
1.28 g/mL at 25 °C (lit.)
SMILES 字串
SCCC(=O)OCC(COC(=O)CCS)(COC(=O)CCS)COC(=O)CCS
InChI
1S/C17H28O8S4/c18-13(1-5-26)22-9-17(10-23-14(19)2-6-27,11-24-15(20)3-7-28)12-25-16(21)4-8-29/h26-29H,1-12H2
InChI 密鑰
JOBBTVPTPXRUBP-UHFFFAOYSA-N
正在寻找类似产品? 访问 产品对比指南
應用
四(3-巯基丙酸)季戊四醇酯可用作合成以下物质的前体：
- 通过与三/四丙烯酸酯的巯基-烯点击化学制备的可降解聚合物网络。
- 可用作牙科修复材料的巯基-烯-甲基丙烯酸盐酯复合材料。
- 用于锂离子电池的基于聚二甲基硅氧烷的网络固体聚合物电解质。
訊號詞
Warning
危險聲明
危險分類
Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Skin Sens. 1
儲存類別代碼
10 - Combustible liquids
水污染物質分類（WGK）
WGK 3
閃點（°F）
Not applicable
閃點（°C）
Not applicable
個人防護裝備
Eyeshields, Gloves, type ABEK (EN14387) respirator filter
其他客户在看
Gowtham Sathyanarayanan et al.
Analytical and bioanalytical chemistry, 410(25), 6677-6687 (2018-08-04)
We report the development and characterization of digital microfluidic (DMF) immobilized enzyme reactors (IMERs) for studying cytochrome P450 (CYP)-mediated drug metabolism on droplet scale. The on-chip IMERs consist of porous polymer (thiol-ene) monolith plugs prepared in situ by photopolymerization and
N A Traugutt et al.
Soft matter, 13(39), 7013-7025 (2017-09-21)
This study presents the first direct comparison of the influence of liquid-crystal order during synthesis on the thermo-mechanical behaviors of main-chain liquid-crystal elastomers (LCEs) in thiol-acrylate networks. Six polydomain nematic elastomer (PNE) chemistries were compared directly by synthesizing with the
Claudio Russo et al.
Polymers, 11(6) (2019-06-07)
Mechanical and rheological properties of novel dual-curing system based on sequential thiol-acrylate and thiol-epoxy reactions are studied with the aim of addressing the obtained materials to suitable advanced applications. The crosslinking process is studied by rheological analysis in order to
A Facile All-Solution-Processed Surface with High Water Contact Angle and High Water Adhesive Force.
Mei Chen et al.
ACS applied materials & interfaces, 9(27), 23246-23254 (2017-06-15)
A series of sticky superhydrophobicity surfaces with high water contact angle and high water adhesive force is facilely prepared via an all-solution-processed method based on polymerization-induced phase separation between liquid crystals (LCs) and epoxy resin, which produces layers of epoxy
B M Fronza et al.
Journal of dental research, 98(7), 779-785 (2019-05-06)
A novel filler-resin matrix interphase structure was developed and evaluated for dental composite restoratives. Nanogel additives were chemically attached to the filler surface to use this created interphase as a potential source of compliance to minimize stress development during polymerization.
商品
The Progress in Development of Dental Restorative Materials
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门