12594

Metal Packed GC Column (fits Agilent, Configuration "A")

phase 3% SP^®-1500, matrix 80/120 Carbopack B support, L × O.D. × I.D. 10.0 ft (3.0 m) × 1/8 in. × 2.1 mm

• UNSPSC Code: 41115710

Properties

• material: stainless steel column
• Quality Level: 100
• manufacturer/tradename: Agilent
• parameter: 0-230 °C temperature (isothermal or programmed)
• technique(s): gas chromatography (GC): suitable
• L × O.D. × I.D.: 10.0 ft (3.0 m) × 1/8 in. × 2.1 mm
• matrix: 80/120 Carbopack B support
• matrix active group: 3% SP^®-1500 phase
• column type: packed GC
• compatibility: for use with Agilent Configuration A

Description

General description

Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents.

An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column fits Agilent 5880, 5890, 6890, 7820, and 7890 (configuration A, on-column injection, all detectors except TCD).

Application

Carbopack B SP-1500 packed gas chromatographic column maybe used for the analysis of toluene in order to study the activity and three dimensional distribution of toluene degrading Pseudomonas putida in a multispecies biofilm assessed by quantitative in situ hybridization and scanning confocal laser microscopy.

Legal Information

SP is a registered trademark of Sigma-Aldrich Co. LLC

Safety Information

• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 2
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable