639303

Indium tin oxide coated PET

surface resistivity 60 Ω/sq, L × W × thickness 1 ft × 1 ft × 5 mil, sheet

• Synonym(s): ITO-PET, Polyethylene terephthalate film, ITO coated
• Linear Formula: In₂O₃ · (SnO₂)_x
• MDL number: MFCD00171662
• UNSPSC Code: 32131014
• PubChem Substance ID: 329759912
• NACRES: NA.23

Properties

• form: sheet
• Quality Level: 100
• surface resistivity: 60 Ω/sq
• L × W × thickness: 1 ft × 1 ft × 5 mil
• transmittance: 550 nm, >78%
• SMILES string: O=[In]O[In]=O.O=[Sn]=O
• InChI: 1S/2In.5O.Sn
• InChI key: LNNWKAUHKIHCKO-UHFFFAOYSA-N

Description

General description

Indium tin oxide films are inherently brittle in nature. To overcome this, ITO is coated with transparent conductive polymers or nanomaterial. Indium tin oxide coated polyethylene terephthalate (PET) film is optically transparent and electrically conductive.The ITO coating is protected by a thin, transparent film, that can be easily peeled off.

Application

A radius of curvature of up to 75 mm will not damage the ITO coating.
Micro mechanical properties of ITO-PET were investigated. Electrical resistance of ITO-PET increases in case of degradation. ITO-PET was used as an electrode in the electrochemical measurements in a study of biosensors composed of polymer brushes. ITO microelectrodes were studied as an “electronic tongue” for analyte recognition. The sheet resistance of ITO, after bending to a radius of 25 mm was investigated, for its use for flexible optical devices. Giant unilamellar vesicle (GUVs) were produced on ITO coated glass slides by drying droplets of the FhuA proteoliposomes.

Features and Benefits

The polyester film products comprise sputtered ITO, and exhibit transmittance and resistance characteristics similar to those of the glass substrates.

Physical properties

Thickness of ITO coating is 1300 Å

Quantity

5 ea = 5 x 1ft x 1ft

Safety Information

• Storage Class Code: 13 - Non Combustible Solids
• WGK: WGK 3
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable
• Personal Protective Equipment: dust mask type N95 (US), Eyeshields, Gloves