Skip to Content
Merck
All Photos(2)

Documents

541443

Sigma-Aldrich

Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]

average Mn 40,000-70,000

Synonym(s):

MEH-PPV

Sign Into View Organizational & Contract Pricing
All Photos(2)

About This Item

Linear Formula:
(C18H28O2)n
CAS Number:
138184-36-8
MDL number:
MFCD03093943
UNSPSC Code:
12352103
NACRES:
NA.23

description

Band gap: 2.3 eV

mol wt

average Mn 40,000-70,000

fluorescence

λex 493 nm; λem 554 nm in toluene

Orbital energy

HOMO -5.3 eV 
LUMO -3 eV 

OLED Device Performance

ITO/PEDOT:PSS/MEH-PPV/Al

  • Color: orange-red
  • Max. Luminance: 220 Cd/m2
  • Max. EQE: 0.3 %
  • Turn-On Voltage: 3.8 V

ITO/PEDOT:PSS/MEH-PPV/PBO/Al
  • Color: orange-red
  • Max. Luminance: 970 Cd/m2
  • Max. EQE: 1.9 %
  • Turn-On Voltage: 2.9 V

ITO/PEDOT:PSS/MEH-PPV/PBZT/Al
  • Color: orange-red
  • Max. Luminance: 1400 Cd/m2
  • Max. EQE: 2.5 %
  • Turn-On Voltage: 2.8 V

OPV Device Performance

ITO/MEH-PPV/BBL/Al

  • Short-circuit current density (Jsc): 1.98 mA/cm2
  • Open-circuit voltage (Voc): 0.93 V
  • Fill Factor (FF): 0.47
  • Power Conversion Efficiency (PCE): 1.1 %

ITO/MEH-PPV:PC61BM(1:4)/Ca
  • Short-circuit current density (Jsc): 2 mA/cm2
  • Open-circuit voltage (Voc): 0.8 V
  • Fill Factor (FF): 0.25
  • Power Conversion Efficiency (PCE): 1.5 %

Mw/Mn

~6

storage temp.

2-8°C

Related Categories

General description

MEH-PPV is a conducting organic semiconductor which has low molecular weight and hydrophobic characteristics. It is a poly(phenylenevinylene) (PPV) derivative and a conjugating polymer with highest occupied molecular orbital (HOMO) below the fermi level of gold.
Light-emitting conjugated polymer.

Application

Organic Semiconductor Laser Materials
Conducting polymer in solar cells and carbon nanotube OLEDs. Useful in producing bright and efficient white polymeric light emitting diodes.
Filter before application.
MEH-PPV can form a nanocomposite with carbon nanotubes (CNTs) by spin coating that can be used for H2S gas sensors. It can also be used as a conducting polymer which results in the formation of a low-cost dopant free hole transporting material (HTM) for the fabrication of perovskite solar cells with a power efficiency of 9.65%. MEH-PPV can be blended with PCPDTBT for use as a sensitizer for dye sensitized photo sensors (DSPS).

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Enhancement of MEH-PPV: CNT for H2S gas sensor.
Ibrahim IM, et al.
Journal of Physics. Conference Series, 1032(1), 012003-012003 (2018)
Photoelectrochemical properties of ZnO nanocrystals/MEH-PPV composite: The effects of nanocrystals synthetic route, film deposition and electrolyte composition.
Petrella A, et al.
Thin Solid Films, 595, 157-163 (2015)
Shen, F.; et al.
Semiconductor Science and Technology, 22, L16-L16 (2006)
Binary blend based dye sensitized photo sensor using PCPDTBT and MEH-PPV composite as a light sensitizer.
Qadir KW, et al.
Synthetic Metals, 210(1), 392-397 (2015)
Selective metal-vapor deposition on solvent evaporated polymer surfaces.
Yamaguchi K and Tsujioka T
Thin Solid Films, 597, 220-225 (2015)
View All Related Papers

Articles

PCBM-Based n-Type Semiconductors

PCBM-based n-type semiconductors - Find p- and n-type organic semiconductors available from Sigma-Aldrich with PCBM library & properties.

High-Performance Semiconductor Polymers Based on Diketopyrrolopyrrole and Thienothiophene

The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.

Mesoporous Materials Synthesis

Mesoporous materials are formed by a self-assembly process from combined solutions of sol-gel precursors (e.g., metal alkoxides) and structure-directing amphiphiles, usually block-copolymers or surfactants.

Organic Semiconductor Laser Materials

Organic Semiconductor Laser Materials

See All

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service