Skip to Content
Merck
All Photos(1)

Key Documents

More Documents

753947

Sigma-Aldrich

ICMA

97% (HPLC)

Synonym(s):

1′,4′-Dihydro-naphtho[2′,3′:1,2][5,6]fullerene-C60, C60 derivative, indene-C60 monoadduct

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Empirical Formula (Hill Notation):
C69H8
CAS Number:
186682-36-0
Molecular Weight:
836.80
UNSPSC Code:
12352103
NACRES:
NA.23

Assay

97% (HPLC)

form

solid

loss

0.5 wt. %, 390 °C

mp

320-340 °C

Orbital energy

LUMO 3.84 eV (CV)

OPV Device Performance

ITO/PEDOT:PSS/P3HT: ICMA (1:1)/Al

  • Short-circuit current density (Jsc): 10.56 mA/cm2
  • Open-circuit voltage (Voc): 0.69 V
  • Fill Factor (FF): 0.54
  • Power Conversion Efficiency (PCE): 3.92 %

ITO/PEDOT:PSS/P3HT:ICMA(1:1)/LiF/Al
  • Short-circuit current density (Jsc): 9.66 mA/cm2
  • Open-circuit voltage (Voc): 0.65 eV
  • Fill Factor (FF): 0.59
  • Power Conversion Efficiency (PCE): 3.65 %

Looking for similar products? Visit Product Comparison Guide

General description

Dipole moment of indene-C60 monoadduct (ICMA) was estimated to be 2.34 debye. Film formation of ICMA under optimum conditions was studied.1 As a potential candidate for field effect transistors (FETs), ICMA exhibits unipolar n-channel characteristics and high electron mobility.

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Polarity and Air-Stability Transitions in Field-Effect Transistors Based on Fullerenes with Different Solubilizing Groups.
Yu H, et al.
ACS Applied Materials & Interfaces, 5(11), 4865-4871 (2013)
Hyunbum Kang et al.
ACS applied materials & interfaces, 4(1), 110-116 (2011-12-14)
The ability to tune the lowest unoccupied molecular orbital (LUMO)/highest occupied molecular orbital (HOMO) levels of fullerene derivatives used as electron acceptors is crucial in controlling the optical/electrochemical properties of these materials and the open circuit voltage (V(oc)) of solar
Beyond PCBM: Understanding the Photovoltaic Performance of Blends of Indene-C60 Multiadducts with Poly(3-hexylthiophene)
Nardes, A. M.; et al.
Advances in Functional Materials, 22, 4115-4127 (2012)

Articles

Optoelectronic Devices Based on Diketopyrrolopyrrole (DPP)-containing Conjugated Small Molecules

Optoelectronic devices such as light-emitting diodes (LEDs), solar cells, and light-emitting field effect transistors (FETs) that utilize organic materials as their light harvesting and/or charge transporting component have been the subject of much academic and commercial attention.

Polymer-Sorted Semiconducting Carbon Nanotubes for Transistors and Solar Cells

Single-walled carbon nanotubes (SWCNTs) are promising materials for use in the active channel of field-effect transistors (FETs), photoabsorbing layers of solar cells and photodetectors because of their ultrafast charge transport mobility.

Soluble Pentacene Precursors

Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.

Development of Small Molecule Donors for Solution-Processed Organic Solar Cells

Solution-processed organic photovoltaic devices (OPVs) have emerged as a promising clean energy generating technology due to their ease of fabrication, potential to enable low-cost manufacturing via printing or coating techniques, and ability to be incorporated onto light weight, flexible substrates.

See All

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service