Saltar al contenido
Merck

139386

Sigma-Aldrich

Hexano

≥99%, suitable for GC/MS, suitable for EPA 1613, ReagentPlus®

Sinónimos:

n-Hexano

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
CH3(CH2)4CH3
Número de CAS:
Peso molecular:
86.18
Beilstein/REAXYS Number:
1730733
EC Number:
MDL number:
UNSPSC Code:
12352001
PubChem Substance ID:
NACRES:
NA.06

product name

Hexano, ReagentPlus®, ≥99%

agency

suitable for EPA 1613

Quality Level

vapor density

~3 (vs air)

vapor pressure

256 mmHg ( 37.7 °C)
5.2 psi ( 37.7 °C)
~132 mmHg ( 20 °C)

product line

ReagentPlus®

assay

≥99%

form

liquid

autoignition temp.

453 °F

expl. lim.

7.7 %

technique(s)

GC/MS: suitable

refractive index

n20/D 1.375 (lit.)

pH

7

bp

69 °C (lit.)

mp

−95 °C (lit.)

solubility

water: insoluble

density

0.659 g/mL at 25 °C (lit.)

SMILES string

CCCCCC

InChI

1S/C6H14/c1-3-5-6-4-2/h3-6H2,1-2H3

InChI key

VLKZOEOYAKHREP-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

Hexane is an alkane and exists in 5 structural isomeric forms, i.e. hexane, isohexane, 3-methylpentane, neohexane and 2,3-dimethylbutane. It can be obtained from petroleum by distillation. It can also be produced by electrolyzing the potassium butyrate solution. It is widely employed organic solvent for the dissolution and isolation of fats and oils.

Application

Hexane may be used in the following studies:
  • Preparation of graft-copolymer chains of poly-(dimethylsiloxane)-g-poly(methyl methacrylate).
  • GC/MS (Gas Chromatography/Mass Spectrometry) characterization of essential oils isolated from various origins.
  • As solvent for the preparation of samples and standards during chromatographic studies.

Hexane may be used as a solvent in the detection of rubrene, using normal phase high performance liquid chromatography. It may also be used as an extraction solvent to concentrate the analytes like synthetic cannabinoids of the aminoalkylindole type and methanandamide in serum, followed by separation using liquid chromatography coupled with tandem-mass spectrometry.

Legal Information

ReagentPlus is a registered trademark of Merck KGaA, Darmstadt, Germany

signalword

Danger

Hazard Classifications

Aquatic Chronic 2 - Asp. Tox. 1 - Flam. Liq. 2 - Repr. 2 - Skin Irrit. 2 - STOT RE 2 Inhalation - STOT SE 3

target_organs

Central nervous system, Nervous system

Storage Class

3 - Flammable liquids

wgk_germany

WGK 3

flash_point_f

-7.6 °F - closed cup

flash_point_c

-22 °C - closed cup


Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 1

1 of 1

Development and validation of a liquid chromatography?tandem mass spectrometry method for the quantitation of synthetic cannabinoids of the aminoalkylindole type and methanandamide in serum and its application to forensic samples
Dresen S, et al.
Journal of Mass Spectrometry : Jms, 46(2), 163-171 (2011)
Occurrence, mechanisms and analytical applications of electrogenerated chemiluminescence. A review
Knight.WA and Greenway.MG et al.
Analyst, 119(5), 879- 890 (1994)
G Di Nicola et al.
Journal of chromatography. A, 1190(1-2), 120-126 (2008-03-18)
Biodiesel (a mixture of fatty acid esters) is normally analyzed using gas chromatography/flame ionization detection, as specified by the ASTM D6584 and EN14105 standards. This paper proposes a binary gradient method for analyzing biodiesel mixtures using non-aqueous reverse phase HPLC
Comparative evaluation of 11 essential oils of different origin as functional antioxidants, antiradicals and antimicrobials in foods.
Sacchetti G, et al.
Food Chemistry, 91(4), 621-632 (2005)
Ali Mohraz et al.
Langmuir : the ACS journal of surfaces and colloids, 21(12), 5298-5306 (2005-06-01)
The development of model materials and image processing methods to directly visualize and quantify colloidal rod assembly by means of confocal laser scanning microscopy (CLSM) is reported. Monodisperse fluorescent colloidal rods are prepared by the uniaxial extensional deformation of sterically

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico