Saltar al contenido
Merck
Todas las fotos(3)

Key Documents

Otros documentos

204455

Sigma-Aldrich

Strontium carbonate

99.995% trace metals basis

Sinónimos:

Strontianite

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(3)

About This Item

Fórmula lineal:
SrCO3
Número de CAS:
1633-05-2
Peso molecular:
147.63
EC Number:
216-643-7
MDL number:
MFCD00011250
UNSPSC Code:
12352302
eCl@ss:
38020224
PubChem Substance ID:
24852270
NACRES:
NA.23

assay

99.995% trace metals basis

form

powder and chunks

impurities

≤55.0 ppm Trace Metal Analysis

mp

1494 °C (lit.)

solubility

dilute aqueous acid: slightly soluble(lit.)

density

3.7 g/mL at 25 °C (lit.)

SMILES string

[Sr++].[O-]C([O-])=O

InChI

1S/CH2O3.Sr/c2-1(3)4;/h(H2,2,3,4);/q;+2/p-2

InChI key

LEDMRZGFZIAGGB-UHFFFAOYSA-L

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Application

  • Strontium carbonate: Extensively used in the production of glazes in ceramics, where it acts as a flux and introduces strontium into the glaze for improved finish and durability. It is also crucial in the manufacture of ferrite magnets, providing the necessary strontium content to enhance magnetic properties. Additionally, its role in pyrotechnics is to contribute to the vibrant red hues seen in fireworks displays (Sigma-Aldrich, CAS 1633-05-2).

Storage Class

13 - Non Combustible Solids

wgk_germany

nwg

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

M Sadeghi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 67(1), 7-10 (2008-10-22)
A novel production technique of yttrium-86 based on bombardment of deposited strontium carbonate was investigated. (86)Y was produced via proton-induced reactions on SrCO(3) target that was prepared by the sedimentation method. Production yield of 0.37mCi/microAh at 30 microA was measured
K Sahner et al.
Physical chemistry chemical physics : PCCP, 9(5), 635-642 (2007-01-24)
In the scope of the present contribution, perovskite SrTi(1-x)Fe(x)O(3-delta) was investigated as a model material for conductometric hydrocarbon sensing at intermediate temperatures between 350 and 450 degrees C. To explain the observations made during sensor optimization in a quantitative way
M Sadeghi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 67(11), 2029-2032 (2008-12-27)
Strontium carbonate deposition on copper substrate was carried out by the sedimentation method in order to produce yttrium-86. Natural strontium carbonate thick layer was prepared with 480 mg SrCO(3), 220 mg ethyl cellulose, and 7.5 mL acetone. This optimum condition
Kai Qiu et al.
Biomaterials, 27(8), 1277-1286 (2005-09-07)
Preparation, characterization and cellular biocompatibility study of a series of calcium polyphosphate containing 0-100 mol% of Ca2+ replaced by Sr2+ were reported. The osteoblastic ROS17/2.8 cell line was used and seeded on the strontium-doped calcium polyphosphate (SCPP) scaffolds to estimate
Guilhem Romieu et al.
Acta biomaterialia, 6(8), 3208-3215 (2010-02-11)
Sterile calcium hydrogenophosphate dihydrate (DCPD) (CaHPO(4).2H(2)O), calcium oxide and strontium carbonate powders were mixed in various liquid phases. Among these, ammonium phosphate buffer (0.75 M, pH 6.9) led to a novel strontium-containing calcium phosphate cement. At a 6/2.5/1.5 M ratio
Ver todos los artículos relacionados

Artículos

Thermoelectric Performance of Perovskite-type Oxide Materials

The prevailing strategies for heat and electric-power production that rely on fossil and fission fuels are having a negative impact on the environment and on our living conditions.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico