콘텐츠로 건너뛰기
Merck
모든 사진(1)

Key Documents

View All Documentation

2637501

Supelco

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

pkg of 1 ea

로그인조직 및 계약 가격 보기
모든 사진(1)

About This Item

UNSPSC 코드:
12000000

포장

pkg of 1 ea

길이 × O.D. × I.D.

78.5 mm × 6.5 mm × 0.75 mm

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a glass tube between the septum and the column, where the sample is evaporated and brought into the gas phase. Split/splitless inlet allows fast sample introduction and vaporization which is highly advantageous for small sample sizes. Though the injection modes for both split and splitless are carried out on the same inlet, there are certain differences like a splitless injection involves the complete introduction of the sample into the column whereas in a split injection, the sample is divided in the inlet as a result only part of the sample is introduced in the column.
Deactivated (silanized) glass inlet liner for capillary injection ports.
  • Fits Agilent (5890, 6890, and 7890)
  • Fits Finnigan (9001GCQ)
  • Fits Varian (CP-1177 Injector)

Storage Class Code

13 - Non Combustible Solids

WGK

WGK 3

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable

가장 최신 버전 중 하나를 선택하세요:

시험 성적서(COA)

Lot/Batch Number

죄송합니다. 지금은 이 제품에 대한 COA이(가) 온라인에서 제공되지 않습니다.

도움이 필요하시면 연락하세요. 고객 지원 부서

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

Ratnasekhar Ch et al.
Food chemistry, 334, 127553-127553 (2020-07-21)
Rice is one of the most important cereals for human nutrition and is a basic staple food for half of the global population. The assessment of rice geographical origins in terms of its authenticity is of great interest to protect
Fire Debris Analysis.
Stauffer E
Science, 249-252 (2007)

문서

The Effect of Container Materials on Production of Light Induced Milk – A Study Using SPME-GC-MS

Various plastics used as barriers to the production of off-flavors in light exposed milk were examined using HS-SPME with a new Carboxen®/PDMS coated Nitinol fiber followed by GC-MS analysis allowing detection of low MW analytes at levels <1 ng/mL.

프로토콜

Headspace SPME-GC/MS Analysis of Terpenes in Hops and Cannabis

Terpenes are present in essential oils derived from plants and often impart characteristic aromas to the plant or its oil. The SPME is a convenient, efficient, and easy to automate sample preparation technology for analyzing the terpene/terpenoid profile of these plant materials.

Cannabis Terpene Analysis by Headspace SPME GC/MS

High-resolution profiling of terpenes and terpenoids to identify fragrance compounds and distinguish hops and cannabis varieties using SPME-GC/MS.

Analysis of Residual Solvents in Hemp Extract by Headspace SPME-GC/MS

The use of solid phase microextraction (SPME) allowed for the straightforward, fast, sensitive, and accurate GC/MS determination of the residual solvent content of spiked and unspiked samples of hemp extract.

Analysis of Bisphenol A in Food
by Solid Phase Microextraction Using an Overcoated Fiber

Bisphenol A (BPA) is suspected to be an endocrine disruptor. Regulations on specific migration limits (SML) from food contact materials are getting tighter (EU 2018/213) requiring more sensitive determinations. An overcoated SPME fiber provides the durability necessary for direct immersion into foods such as canned soup and pumpkin, allowing for low level analysis of BPA via SPME-GC-MS/MS.

관련 콘텐츠

GC/MS/MS Analysis of Bisphenol A (BPA) in a Fruit Flavored Energy Drink on the SLB-PAHms Column After SPME Using an Overcoated SPME Fiber

GC/MS/MS Analysis of Bisphenol A (BPA) in a Fruit Flavored Energy Drink on the SLB-PAHms Column After SPME Using an Overcoated SPME Fiber

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.