추천 제품
material
polyethersulfone membrane ((PES))
white PVDF device (molded parts)
Quality Level
파라미터
4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)
H × diam. × filtration area
4.03 cm (1.59 in.) × 4.37 cm (1.72 in.) × 3.4 cm2
여과 면적
3.4 cm2
중량
14.73 gempty
불순물
may contain <0.25 EU/mL bacterial endotoxins (LAL test)
피팅
female Luer-Lok® inlet (inlet and vent)
male Luer outlet (Slip)
저장 온도
no temp limit
일반 설명
The Viresolve® Pro Micro 40 Kit is ideally suited for performing your filter sizing and viral clearance evaluations. Each kit contains 3 sets of 3 Micro 40 Devices from three different membrane layering combinations* and certificate of quality. Every Viresolve® Pro Micro Device undergoes a Binary Gas Test before product release ensuring optimum quality and performance consistency.* Viresolve® Pro Devices are built with two membrane layers. Each Viresolve® Pro Micro 40 Device is packaged in a blister pack and labeled with the device lot and the top layer membrane lot/roll number.
애플리케이션
Process development, studies, Viral clearance, evaluations
특징 및 장점
- Small scale devices for process development, optimization and validation studies
- Membrane based adsorptive prefilters to remove protein aggregates and other fouling species
- Nine units per kit (one Membrane lot)
기타 정보
These products are non-fiber releasing filters as defined in 21 CFR 210.3(b).
법적 정보
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.