추천 제품
material
PVDF membrane
modified acrylic housing
Quality Level
무균
sterile; γ-irradiated
제품 라인
Millex®
특징
CE compliant
holdup volume≤ 0.1 mL
hydrophilic
(bidirectional)
medical device
제조업체/상표
Millex®
파라미터
10.3 bar max. inlet pressure (150 psi)
45 °C max. temp.
직경
33 mm
여과 면적
4.52 cm2
inlet to outlet H
27 mm
용적
100 mL
기질
Durapore®
공극 크기
0.1 μm pore size
피팅
female Luer-Lok® inlet
male Luer outlet slip
배송 상태
ambient
일반 설명
The Millex®-VV Filter Unit (Sterile) is a medical device intended for use as a syringe filter to sterilize and/or clarify low volume solutions in direct patient care and pharmacy admixture applications.
애플리케이션
- Clinical benefits: Removal of microorganisms, particles, precipitates, and undissolved powders larger than the membrane’s rated pore size from solutions for clinical use.
- Hospital pharmacy: Sterile filtration and/or clarification of small volumes of protein pharmaceuticals, diagnostic imaging agents, chemotherapeutics, aqueous solutions, or water during admixture preparation.
- Direct patient care: Sterilization and/or particulate removal from epidural and other liquid anaesthetics as well as from irrigation solutions used in ophthalmic, otic, and other surgical procedures.
특징 및 장점
- Bidirectional support of the filter membrane
- Removes microorganisms, particles, precipitates, and undissolved powders larger than the rated pore size
- Single-use, non-pyrogenic, and non-toxic
- Polyvinylidene fluoride (PVDF) membrane filter sealed in a modified acrylic copolymer (MMA) housing
- Compatible with most aqueous solutions
- CE marked
기타 정보
Devices are intended for medical and laboratory professional use only.
법적 정보
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.