SLGVVR255F
Millex® PVDF syringe filter
pore size 0.22 μm, diam. 25 mm, sterile, hydrophilic, vented
동의어(들):
Vented Millex®-GV 0.22 µm Filter Unit, Vented Millex®-GV Filter Unit, vented syringe filter, domed filter, syringe filter, low-binding filter
로그인조직 및 계약 가격 보기
모든 사진(1)
About This Item
UNSPSC 코드:
41104922
NACRES:
NB.24
추천 제품
material
PVC housing
PVDF membrane
Quality Level
무균
ethylene oxide treated
sterile
제품 라인
Millex®
특징
hydrophilic
vented
포장
pack of 50 ea
제조업체/상표
Millex®
기술
low protein-binding filtration: suitable
sterile filtration: suitable
직경
25 mm
여과 면적
4 cm2
housing diam.
29 mm
inlet to outlet H
27 mm
용적
100 mL
기질
Durapore®
공극 크기
0.22 μm
입력
aqueous solution(s)
버블 포인트(bubble point)
≥50 psi
피팅
female Luer-Lok® inlet
male Luer outlet slip
일반 설명
Vented Millex®-GV filter units are syringe filters for sterilization of low volume aqueous solutions where venting and low protein-binding membrane is desired.
특이성
Materials
Filter membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), pore size 0.22 μm, type GV
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm2 (0.62 in2) Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.1 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge (typical volume when vent hole is covered to prevent air flow)
Sterilization method: Ethylene oxide gas
Connections Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 40 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, yellow outlet
Filter membrane: Hydrophilic Durapore® polyvinylidene fluoride (PVDF), pore size 0.22 μm, type GV
Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size 0.03 μm
Housing: Polyvinyl chloride (PVC)
Dimensions
Inlet to outlet: 27 mm (1.06 in.)
Diameter: 29 mm (1.14 in.)
Filtration area: 4 cm2 (0.62 in2) Temperature limit: 45 °C (113 °F)
Pressure limit at 21 °C: 5.1 bar (75 psi) inlet and differential
Filtration volume: 1–100 mL
Hold-up volume: ≤ 0.1 mL after air purge (typical volume when vent hole is covered to prevent air flow)
Sterilization method: Ethylene oxide gas
Connections Female Luer-Lok® inlet, male Luer-slip outlet
Flow rate at 2.1 bar (30 psi), 21 °C: ≥ 40 mL/min
Bubble point (water): ≥ 50 psi
Color: clear inlet, yellow outlet
애플리케이션
Syringe filter for vented sterile filtration of low volume aqueous solutions
특징 및 장점
- For research use only (RUO)
- Single use only
- Low protein binding
- Vented inlet to prevent air locking
- Non-pyrogenic and non-toxic
법적 정보
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.