MTGR15000

Aervent^® 50 Capsule Filter

pore size 0.2 μm

• 동의어(들): Aervent^®-50 Filter Unit 0.2 µm hydrophobic 3/4 in. TC/TC, EPA Est. 041237-FRA-001
• UNSPSC 코드: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

속성

• material: PTFE membrane; polypropylene ; polypropylene housing
• Quality Level: 400
• 무균: non-sterile
• 멸균 적합성: gamma compatible
• 제품 라인: Aervent^®
• 특징: hydrophobic
• 제조업체/상표: Aervent^®
• 파라미터: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• 기술: gas filtration: suitable
• 길이: 5.5 cm (2.16 in.)
• 너비: 2.4 in.
• 직경: 6.2 cm (2.4 in.)
• 여과 면적: 19.6 cm²
• 불순물: ≤0.5 EU/mL (LAL test, Aqueous extraction)
• 중량 추출물: ≤1.0 mg
• 기질: Aervent^®
• 공극 크기: 0.2 μm pore size
• 버블 포인트(bubble point): ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• 피팅: (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)
• 배송 상태: ambient

설명

일반 설명

This Aervent^® hydrophobic Capsule filter contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter, with a 0.2 μm pore size and 19.6 cm² filtration area, is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane within MTGR15000 provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility. For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent^® Capsule Filter is integrity tested during manufacture.

애플리케이션

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

제조 메모

Sterilization Method
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable

분석 메모

Bacterial Retention
Quantitative retention of 10⁷ CFU/cm²Brevundimonas diminuta (ATCC^® 19146) per ASTM F838-83 methodology

Gravimetric Extractables: in 70/30 % IPA/water

기타 정보

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

법적 정보

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ATCC is a registered trademark of American Type Culture Collection