콘텐츠로 건너뛰기
Merck
모든 사진(1)

Key Documents

추가 자료

MPGP002A1

Milli-Q

Millipak® Filter

0.22 μm membrane filter for particulate and bacteria-free water at the point of dispense for the Milli-Q® IQ, IX and EQ 7 series water purification systems.

동의어(들):

Millipak® 0.22 μm filter

로그인조직 및 계약 가격 보기
모든 사진(1)

About This Item

UNSPSC 코드:
41104212
eCl@ss:
33050190
NACRES:
NB.24

material

polyethersulfone filter

Quality Level

300

포장

pkg of 1 unit

제조업체/상표

Millipak®

공극 크기

0.22 μm pore size

호환성

for use with Milli-Q® EQ 7000
for use with Milli-Q® EQ 7008
for use with Milli-Q® EQ 7016
for use with Milli-Q® IX 7003
for use with Milli-Q® IX 7005
for use with Milli-Q® IX 7010
for use with Milli-Q® IX 7015
for use with Milli-Q® IQ 7000
for use with Milli-Q® IQ 7003
for use with Milli-Q® IQ 7005
for use with Milli-Q® IQ 7010
for use with Milli-Q® IQ 7015

배송 상태

ambient

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

The Millipak® 0.22μm hydrophilic membrane filter is intended to produce particulate-free and bacteria-free water at the point of dispense of the Milli-Q® IQ 7000 system, Milli-Q® IQ 7003/05/10/15, Milli-Q® IX 7003/05/10/15 and Milli-Q® EQ 7000/08/16 water purification systems..
The filter is designed with a 0.22μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a styrene-acrylonitrile housing that serves to minimize organic and inorganic extractable release.

애플리케이션

Pure and Ultrapure water produced by a Millipak® 0.22 μm filter is suitable for many different laboratory applications, including microplastics research, nanoparticle studies, food analyses and HPLC analyses.

특징 및 장점

  • Each Millipak® 0.22μm filter is individually tested, hermetically sealed and delivered with a Certificate of Quality.
  • Validated to deliver bacteria-free water (<0.01cfu/mL when installed and used in a laminar flow hood).
  • Carefree maintenance: Easily installed and replaced.
  • Redesigned bottom-tip for a secured installation of the protection bell.
  • Validated to deliver particulate-free water (no particles with size >0.22 μm)
  • e-Sure tag for RFID connection with E-POD® or Q-POD® dispenser enables full traceability (data management) and automatic consumable status monitoring on the POD’s touchscreen interface.

기타 정보

Directions For Use:

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: General laboratory analysis
  • Intended Use: Water purification
  • Instructions for Use: This item provides water filtered through 0.22 ?m sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
  • Storage Statement: Store in a dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

법적 정보

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

또한 이 제품과 함께 일반적으로 구입

제품 번호
설명
가격

ZIQ7003T0C

Milli-Q® IQ 7003 Ultrapure and Pure Water Purification System, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 3 L/hr from tap water feed

ZIQ7005T0C

Milli-Q® IQ 7005 Ultrapure and Pure Water Purification System, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 5 L/hr from tap water feed.

ZIQ7010T0C

Milli-Q® IQ 7010 Ultrapure and Pure Water Purification System, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 10 L/hr from tap water feed.

ZIQ7015T0C

Milli-Q® IQ 7015 Ultrapure and Pure Water Purification System, Produces ultrapure (Type 1) water and pure (Type 2) water with a production flow rate of 15 L/hr from tap water feed.

ZIX7003T0C

Milli-Q® IX 7003 Pure Water Purification System, The most advanced Milli-Q® pure water system for the production of Elix® quality water at a flow rate of 3 L/h., input: potable tap water, output: type 2 water (> 5 MΩ·cm)

ZIX7005T0C

Milli-Q® IX 7005 Pure Water Purification System, The most advanced Milli-Q® pure water system for the production of Elix® quality water at a flow rate of 5 L/h., output: type 2 water (> 5 MΩ·cm), input: potable tap water

ZIX7010T0C

Milli-Q® IX 7010 Pure Water Purification System, The most advanced Milli-Q® pure water system for the production of Elix® quality water at a flow rate of 10 L/h., input: potable tap water, output: type 2 water (> 5 MΩ·cm)

ZIX7015T0C

Milli-Q® IX 7015 Pure Water Purification System, The most advanced Milli-Q® pure water system for the production of Elix® quality water at a flow rate of 15 L/h., input: potable tap water, output: type 2 water (> 5 MΩ·cm)

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

Zehua Yan et al.
Journal of hazardous materials, 384, 121489-121489 (2019-11-11)
Concerns have been raised regarding the ingestion of microplastics (MPs) by numerous organisms including humans. However, no efficient and standardized methods are available for extracting MPs from feces. In this study, we introduce a novel approach with high digestion efficiency

문서

Drinking Water Testing by Ion Chromatography using Ultrapure Water

This study reviews the suitability of ultrapure water for the IC analysis of drinking water. Inorganic ions and disinfectant by-products (DBPs) were assessed.

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.