MFSL06GT3

Durapore^® 5.0 µm, Millipak^® Final Fill Capsule

Millipak^® Final Fill 60

• UNSPSC 코드: 23151806

속성

• material: polysulfone device; polysulfone support
• Quality Level: 400
• Agency: meets EP 2.6.14; meets JP 4.01; meets USP 85
• 무균: irradiated; non-sterile
• 멸균 적합성: gamma compatible
• 제품 라인: Millipak^® Final Fill 60
• 특징: hydrophilic
• 제조업체/상표: Millipak^®
• 파라미터: 10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse); 4.5 L/min flow rate at 0.69 bar (ΔP); 5.5 bar max. inlet pressure (80 psi) at 25 °C; 60 L process volume; 80 psi max. differential pressure (5.5 bar) at 25 °C (Forward)
• 기술: prefiltration: suitable
• 길이: 4.3 in.
• 너비: 3.0 in.
• filter filtration area: 300 cm²
• 불순물: <0.25 EU/mL USP bacterial endotoxins (LAL test, per device; aqueous extraction); <0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction)
• 기질: Durapore^®
• 공극 크기: 5.0 μm pore size
• 버블 포인트(bubble point): ≥2 psi (138 mbar), air with water
• 피팅: (38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)

설명

일반 설명

Device Configuration: Capsule

포장

Double Easy-Open bag

제조 메모

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ≤40  kGy gamma exposure.

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

기타 정보

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer general guidelines section of user guide shipped with this product
• Storage Statement: Please refer user guide shipped with this product
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

법적 정보

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany