MFGB02GH3

Hydrophobic Durapore^® 0.22 µm, Millipak^® Final Fill Capsule

Millipak^® Final Fill 20

• UNSPSC 코드: 23151806

속성

• material: polysulfone device; polysulfone support
• Quality Level: 400
• Agency: meets EP 2.6.14; meets JP 4.01; meets USP 85
• 무균: irradiated; non-sterile
• 멸균 적합성: gamma compatible
• 제품 라인: Millipak^® Final Fill 20
• 특징: hydrophilic
• 제조업체/상표: Millipak^®
• 파라미터: 0.35 bar max. differential pressure (5 psid) at 121 °C (Reverse); 0.51 L/min flow rate at 0.69 bar (ΔP); 10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse); 20 L process volume; 25 psi max. differential pressure (1.7 bar) at 80 °C (Forward); 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse; intermittent); 5.5 bar max. inlet pressure (80 psi) at 25 °C; 50 psi max. differential pressure (3.5 bar) at 25 °C (Forward); 60 psi max. differential pressure (4.1 bar) at 25 °C (Forward)
• 기술: sterile filtration: suitable
• 길이: 3.2 in.
• 너비: 3.0 in.
• 필터 여과 영역: 100 cm²
• 불순물: <0.25 EU/mL USP bacterial endotoxins (LAL test, per device; aqueous extraction); <0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction)
• Matrix: Durapore^®
• 공극 크기: 0.22 μm pore size
• 피팅: (6 mm (1/4 in.) Hose Barb Inlet and Outlet)

설명

일반 설명

Device Configuration: Capsule

포장

Double Easy-Open bag

제조 메모

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ≤40  kGy gamma exposure.

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

분석 메모

Bacterial Grow-Through: Quantitative retention of 1 x 10⁷ CFU/cm² Brevundimonas diminuta ATCC^® 19146 per ASTM^® F838 methodology.

기타 정보

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer general guidelines section of user guide shipped with this product
• Storage Statement: Please refer user guide shipped with this product
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

법적 정보

ASTM is a registered trademark of American Society for Testing and Materials

ATCC is a registered trademark of American Type Culture Collection

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany