1.50252

Purospher^® STAR RP-18 endcapped (5 µm) HPLC Columns

L × I.D. 250 mm x 4 mm LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use

• 동의어(들): Purospher^® STAR RP-18 endcapped (5 µm) LiChroCART^™ 250-4
• UNSPSC 코드: 41115709
• NACRES: SB.52

속성

• product name: Purospher^® STAR RP-18 endcapped (5 µm), L × I.D. 250 mm x 4 mm LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use
• material: stainless steel column
• Quality Level: 100
• Agency: suitable for USP L1
• 제품 라인: Purospher^®
• 특징: endcapped
• 포장: 1 ea of
• 라벨링 범위: 17% Carbon loading
• 파라미터: 250 bar pressure; 65 °C max. temp.
• 기술: HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High)
• 컬럼 길이 × I.D.: 25 cm × 4 mm
• 표면적: 330 m²/g
• 기질: fully porous particle
• 기질 활성군: C18 bonding phase
• 입자 크기: 5 μm
• 공극 크기: 120 Å pore size
• operating pH range: 1.5-10.5
• 분리 기술: reversed phase
• 저장 온도: no temp limit

설명

일반 설명

Purospher^® STAR RP-18 endcapped, 5 µm HPLC columns are designed for universal use and allow the separation of basic, neutral, and metal chelating compounds with simple mobile phases and excellent peak symmetry. They are based on ultra-pure fully porous silica particles (Type B). These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test. Thanks to these features, Purospher^® STAR RP-18 endcapped, 5 µm HPLC columns allow maximum flexibility to use the best chromatographic conditions for any separation including reversed phase.Purospher^® STAR RP-18 endcapped, 5 µm LiChroCART^™ 250-4 is a cartridge column which requires a manuCART^™ cartridge column holder part number 1.51486.0001. The manuCART^™ can be used to hold one cartridge column with or without direct integration of a 4-4 mm guard column. The recommended guard column is Purospher^® STAR RP-18 endcapped (5 µm) LiChroCART^™ 4-4 part number 1.50250.0001. LiChroCART^™ cartridge columns mounted with a manuCART^™ cartridge column holder are hand-tight only and have therefore a maximum pressure stability of 250 bar. For higher pressure stability requirements Purospher^® STAR RP-18 endcapped, 5 µm Hibar^® RT 250-4 HPLC columns are available part number 1.150037.0001.The column dimension of 250 mm length x 4 mm I.D. is the optimal choice for high resolution HPLC separation of complex samples.Item 1.50252.1003 is a Validation kit containing 3 Purospher^® STAR RP-18 endcapped, 5 µm LiChroCART^™ 250-4 cartridge columns from 3 different base material lots.Learn more about Purospher^® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

애플리케이션

Intended for the separation of aflatoxins, aldehydes, alkaloids, antibiotics, catecholamines, explosives, oligonucleotides, esters, fat-soluble vitamins, lipids, fatty acids, flavonoids, ketones, nitrosamines, nucleosides, PAHs, PCBs, peptides, pesticides, phenols, phthalates, preservatives, steroids, metabolized steroids, sulfonamides, sweeteners, and water-soluble vitamins.

특징 및 장점

• Good suitability for LC-MS applications

분석 메모

Pressure: ≤ 130 bar
Theoretical Plates (N/m) (Toluene): ≥ 80000
Symmetry (Toluene): 0.8 - 1.4
Capacity factor (Toluene): ≥ 1.5

법적 정보

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany

LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany

MANUCART is a trademark of Merck KGaA, Darmstadt, Germany

Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany