콘텐츠로 건너뛰기
Merck
모든 사진(1)

주요 문서

578177

Sigma-Aldrich

Polypyrrole

doped, conductivity 0.5-1.5 S/cm (pressed pellet, typical), extent of labeling: ~5 wt. % loading, coated on titanium dioxide

동의어(들):

PPy

로그인조직 및 계약 가격 보기


About This Item

CAS Number:
MDL number:
UNSPSC 코드:
12352103
PubChem Substance ID:
NACRES:
NA.23

Quality Level

양식

solid

포함

proprietary organic sulfonic acid as dopant

라벨링 범위

~5 wt. % loading

solubility

H2O: insoluble
organic solvents: insoluble

SMILES string

[nH]1cccc1

InChI

1S/C4H5N/c1-2-4-5-3-1/h1-5H

InChI key

KAESVJOAVNADME-UHFFFAOYSA-N

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

Process up to at least 170°C in air. Process up to at least 270°C under nitrogen.Polypyrrole (PPy) is a conductive and highly stable polymer. It may be prepared by standard electrochemical technique. PPy may also be prepared by reacting β-napthalene sulfonic acid (NSA) and ammonium peroxo-disulphate in aqueous medium. The charges on the surfaces can be easily modified by doping the polymer during its synthesis. Solubility and conductivity measurements of PPy doped with camphor sulfonic and dodecyl benzene sulfonic acid has been reported.

애플리케이션

Conducting polymer.
Conductive additive for thermoplasitics and thermosets.

포장

Packaged in glass bottles

Storage Class Code

13 - Non Combustible Solids

WGK

WGK 3

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable


가장 최신 버전 중 하나를 선택하세요:

시험 성적서(COA)

Lot/Batch Number

적합한 버전을 찾을 수 없으신가요?

특정 버전이 필요한 경우 로트 번호나 배치 번호로 특정 인증서를 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

Chemical Synthesis and Morphology of b?Naphthalene Sulfonic Acid-Doped Polypyrrole Micro/Nanotube.
Akinyeye R, et al.
Fullerenes, Nanotubes, and Carbon Nanostructures, 14 (2006)
Mingming Ma et al.
Science (New York, N.Y.), 339(6116), 186-189 (2013-01-12)
Here we describe the development of a water-responsive polymer film. Combining both a rigid matrix (polypyrrole) and a dynamic network (polyol-borate), strong and flexible polymer films were developed that can exchange water with the environment to induce film expansion and
Behzad Haghighi et al.
Colloids and surfaces. B, Biointerfaces, 103, 566-571 (2012-12-25)
An overoxidized polypyrrole (OOPPy) film was electrodeposited on a glassy carbon electrode (GCE) and the modified electrode (GCE/OOPPy) was then decorated with Au nanoparticles (nanoAu). Glucose oxidase was immobilized on the surface of nanoAu decorated OOPPy modified GCE to fabricate
Darren Svirskis et al.
Therapeutic delivery, 4(3), 307-313 (2013-02-28)
Intrinsically conducting polymers, such as polypyrrole (PPy), have been utilized for drug delivery purposes as drug release rates can be tuned by electrical stimulation. Electrical stimulation can be used to switch the redox state of PPy, subsequently changing the electrostatic
Jie Shao et al.
Nanoscale, 5(4), 1460-1464 (2013-01-15)
In order to explore the potential application of sulfur in aqueous rechargeable batteries, core-shell sulfur-polypyrrole (S@PPy) composites were prepared through a novel one-pot and surfactant-free method. Sulfur exhibits a very high capacity of 473 mA h g(-1) and good cycling

문서

The application of conducting polymers at the interface with biology is an exciting new trend in organic electronics research.

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm2.2

For several decades, the need for an environmentally sustainable and commercially viable source of energy has driven extensive research aimed at achieving high efficiency power generation systems that can be manufactured at low cost.

Global Trade Item Number

SKUGTIN
578177-10G4061832629148

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.