콘텐츠로 건너뛰기
Merck
모든 사진(3)

문서

544760

Sigma-Aldrich

Zirconium(IV) oxide

nanopowder, <100 nm particle size (TEM)

동의어(들):

Nano zirconium oxide, ZrO2 nanoparticles, Zirconia

로그인조직 및 계약 가격 보기
모든 사진(3)

About This Item

Linear Formula:
ZrO2
CAS Number:
1314-23-4
Molecular Weight:
123.22
EC Number:
215-227-2
MDL number:
MFCD00011310
UNSPSC 코드:
12352302
PubChem Substance ID:
24878784
NACRES:
NA.23

형태

nanopowder

반응 적합성

reagent type: catalyst
core: zirconium

표면적

≥25 m2/g

입자 크기

<100 nm (TEM)

bp

5000 °C (lit.)

mp

2700 °C (lit.)

density

5.89 g/mL at 25 °C (lit.)

SMILES string

O=[Zr]=O

InChI

1S/2O.Zr

InChI key

MCMNRKCIXSYSNV-UHFFFAOYSA-N

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

Zirconium(IV) oxide (ZrO2) which is also known as zirconia is a ceramic nanoparticle that can be used as a nano-filler. It can be incorporated in a variety of polymer and metal composites to improve the thermo-mechanical properties of the base material.

애플리케이션

ZrO2 can be used as a filler material on PMMA which can further be used as a high strength denture base material. It can also be used as a composite based metallic coating that can improve the overall mechanical properties of the substrate.

Storage Class Code

11 - Combustible Solids

WGK

nwg

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable

개인 보호 장비

dust mask type N95 (US), Eyeshields, Gloves

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

Friction and wear behavior of zirconium oxide reinforced PMMA composites
Akinci A, et al.
Composites Part B: Engineering, 56(1-2), 42-47 (2014)
Support and solvent effects on the liquid-phase chemoselective hydrogenation of crotonaldehyde over Pt catalysts
Hidalgo-Carrillo J, et al.
Applied Catalysis A: General, 385(1-2), 190-200 (2010)
Paolo Vigolo et al.
Journal of prosthodontics : official journal of the American College of Prosthodontists, 17(8), 621-626 (2008-09-19)
The purpose of this study was to assess in vitro the marginal fit of four-unit fixed partial dentures (FPDs) produced using three different computer aided design/computer aided manufacturing (CAD/CAM) all-ceramic systems before and after porcelain firing cycles and after glaze
Zhongpu Zhang et al.
Acta biomaterialia, 9(9), 8394-8402 (2013-05-21)
Effective and reliable clinical uses of dental ceramics necessitate an insightful analysis of the fracture behaviour under critical conditions. To better understand failure characteristics of porcelain veneered to zirconia core ceramic structures, thermally induced cracking during the cooling phase of
Katarzyna Zielińska et al.
Journal of colloid and interface science, 377(1), 362-367 (2012-04-14)
Ni-P-nano-ZrO(2) coatings were produced using the electroless deposition technique. To prevent agglomeration of zirconia nanoparticles in the plating bath, various surfactant additives (anionic, cationic, and nonionic) were used. The most stable bath was obtained with the addition of dodecyltrimethylammonium bromide
모든 관련된 서류 보기

문서

Materials for Clean H2 Production from Bioethanol Reforming

Hydrogen is one of the most important resources in providing food, fuel, and chemical products for our everyday life. Sustainable catalytic hydrogen production from bioethanol has gained significant attention in recent years due to globally diminishing fossil fuel supplies, which have necessitated the search for new chemical feedstocks.

Strategy for Toxicity Screening of Nanomaterials

A key challenge for nanomaterial safety assessment is the ability to handle the large number of newly engineered nanomaterials (ENMs), including developing cost-effective methods that can be used for hazard screening.

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.