Skip to Content
Merck
All Photos(2)

Key Documents

V0CPAK001

Milli-Q

VOC-Pak® Polisher

Sign Into View Organizational & Contract Pricing


About This Item

UNSPSC Code:
41104212
eCl@ss:
33050190
NACRES:
JA.14

material

carbon (activated)
polyethylene (Luer Plug)
polyethylene connector
polypropylene housing

Quality Level

description

Production of volatile organic compound-free ultrapure water at the point of dispense of the Direct-Q® / Simplicity® / Synergy® / Milli-Q® Direct and Reference systems

packaging

pkg of 1 unit

manufacturer/tradename

VOC-Pak®

parameter

≤2 bar pressure
≤2.0 L/min flow rate
5 °C temp. range (30 °C)

resistivity

>18.0 MΩ-cm (at 25 degree celcius)

L

12.7 cm

impurities

<5 ppb TOC

fitting

1/4 in. inlet connection ( Gaz (straight) F connection and Luer F)
1/4 in. outlet connection (Gaz (straight) F connection and Luer F)

compatibility

for use with Direct-Q® UV
for use with Direct-Q®
for use with Milli-Q® Direct
for use with Milli-Q® Reference
for use with Simplicity® UV
for use with Simplicity®
for use with Synergy® UV
for use with Synergy®

shipped in

ambient

Looking for similar products? Visit Product Comparison Guide

General description

VOC-Pak® Polisher is designed to purify ultrapure water in the final purification step at point-of-dispense of Type 1 water purification systems. It is an activated carbon-based cartridge specifically designed for the effective removal of volatile organic compounds (VOCs) from ultrapure water.

VOCs are environmental contaminants causing health and safety issues that needs to be routinely analyzed in water, soil, gas and air samples. Specifications for VOCs in drinking water have been established by different regulatory agencies in many countries.
VOC-Pak® Polisher is, therefore, an excellent choice for scientists in need of VOC-free ultrapure water for their analytical applications.

Application

The VOC-Pak Polisher is used to produce VOC-free water for the analysis of VOCs in water by GC and GC-MS when fed by an ultrapure water system.

VOC-free water is suitable for glassware rinsing, blanks, reagents, sample preparation, standard solutions or dilutions in the analysis of those substances, or in studies where VOCs may interfere. It is used in the development of nanoparticle sensors and nanoelectrodes.

Features and Benefits

  • Validated to produce 300 L of VOC-free ultrapure water.
  • Easy maintenance: the polisher is easily installed and replaced.
  • Bottom-tip is redesigned for a secured installation of the protection bell.
  • e-Sure tag for RFID connection with Q-POD® dispenser enables full traceability (data management) and automatic consumable status monitoring on the POD′s touchscreen interface.
  • Certificate of Quality available online.
  • Provides a warranty of water suitable for VOC analysis: blanks and standards preparation; glassware cleaning; and sample dissolution (if VOCs are analyzed in a matrix other than water i.e., in soil).

Legal Information

DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
SIMPLICITY is a registered trademark of Merck KGaA, Darmstadt, Germany
SYNERGY is a registered trademark of Merck KGaA, Darmstadt, Germany
VOC-PAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service