GTTP03700

Filtri a membrana in policarbonato, pori da 0,22 μm

Isopore^™, filter diam. 37 mm, hydrophilic

• Sinonimo/i: Isopore^™ Membrane Filter
• Codice UNSPSC: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Proprietà

• Materiali: plain filter; polycarbonate membrane; white filter
• Sterilità: non-sterile
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Isopore^™; Millipore
• Parametri: 0.007 L/min-cm²-psi air flow rate; 140 °C max. temp.; 3.36 mL/min-cm²-psi water flow rate (maximum flow rate per 1.0 psi); ~16 mL/min-cm² water flow rate at 10 psi (typical results)
• Diam. filtro: 37 mm
• Spessore: 25 μm
• Estraibili (gravimetria): <1%
• Indice di rifrazione: n/D 1.6
• Matrice: Isopore^™
• Dimensione pori: 0.22 μm pore size; 13.8 % porosity
• Punto di bolla: ≥5.2 bar, air with water at 23 °C
• Condizioni di spedizione: ambient

Descrizione

Descrizione generale

The Isopore^™ membrane is a polycarbonate, track-etched screen filter useful in surface visualization. It is useful in the analysis of airborne contaminants using optical or electron microscopy. The precise pore diameter and a consistent pore size enable accurate size-base sample separation. Isopore^™ membrane filters are applicable for use in chemotaxis assay, air, monitoring and epifluorescent microscopy.

Applicazioni

• Chemotaxis
• Bioassays
• Cytology
• Air monitoring
• SEM analysis
• Sterility testing
• Microplastics analysis
• Microplastics analysis grade water

Caratteristiche e vantaggi

• Isopore^™ membrane structure enables particles retention on the surface for easy counting and analysis.
• Displays low background interference.
• Non-hygroscopic.
• reduced sample analysis time.
• Translucent material.

Avvertenza

Possible reduction in flow rates may occur after autoclaving.

Note legali

ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany