9Z2786

Non-sterilized Millipak^® Final Fill 100 Filter Unit 0.45  µm 1 1/2  in. TC/TC

• Codice UNSPSC: 23151806
• eCl@ss: 32031690

Proprietà

• Materiali: PVDF ; polysulfone ; polysulfone support
• Livello qualitativo: 400
• Sterilità: non-sterile
• Caratteristiche: hydrophilic
• Parametri: 10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse); 3.0 L/min flow rate at 0.69 bar; 80 psi max. differential pressure (5.5 bar) at 25 °C (Forward); 80 psi max. inlet pressure (5.5 bar) at 25 °C
• Superficie filtrante: 500 cm²
• Diam. connessione ingresso: 1 1/2 in.
• Diam. connessione uscita: 1-1/2 in.
• Misura: 100 L
• Impurezze: <0.25 EU/mL Aqueous extraction (LAL test, meeting requirements of USP <85>, EP 2.6.14 and JP 4.01.)
• Matrice: Durapore^®
• Dimensione pori: 0.45 μm
• Punto di bolla: ≥26 psi (1790 mbar), air with water
• Raccordi: inlet sanitary flange; outlet sanitary flange; 38 mm (1 1/2 in.) sanitary flange drain/vent
• Compatibilità: suitable for endotoxin

Descrizione

Descrizione generale

Aqueous extraction contains < 0.25<nbsp/> EU/mL per device as determined using the Limulus Amebocyte Lysate (LAL) test, meeting requirements of USP <85>, EP 2.6.14 and JP 4.01.

Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ? 40  kGy gamma exposure.

Confezionamento

Double Easy-Open bag

Note legali

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Esclusione di responsabilità

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.