Passa al contenuto
Merck
Tutte le immagini(1)

Documenti fondamentali

TRD3D0026

Sigma-Aldrich

Shogun superior PLA 3D printing filament

greener alternative

natural, diam. 1.75 mm

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Codice UNSPSC:
23261601
NACRES:
NA.23

Caratteristiche più verdi

Waste Prevention
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

Diametro

1.75 mm

Peso

1 kgeach

Categoria alternativa più verde

Descrizione generale

Shogun Superior PLA for heat resistance and toughness
  • Shogun can withstand high temperatures up to 90 °C without losing its shape.
  • Up to 20% more impact resistant than conventional PLA.
  • A truly biodegradable polymer according to EN13432 rule.
  • Printability is comparable to the standard PLA with no warping and no heated bed required.

Material Properties
  • Density: 1.3 g/cm3
  • IZOD impact strength notched 23 °C: 50L/m
  • Tensile elongation at yield: 38 Mpa
  • Tensile elongation at break: >10%
  • Heat deflection temperature: 90 °C
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with " Waste prevention" and "Design for energy efficency". Architectural 3D printing allows for design and print of more complex designs with little or no wastage. It is environmentally friendly.Click here for more information.

Applicazioni

Shogun Superior PLA 3D Printing Parameters
  • Extruder (nozzle) temperature: 190 +/-10 °C
  • Bed temperature: cold to 90 °C
  • Print speed: 60-70 mm/s
  • Fan: 0-20 %
  • Minimum nozzle diameter: 0.3 mm
  • Plate materials: blue tape
This product can be used in material extrusion 3D printing technique.

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable


Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.

Se ti serve aiuto, non esitare a contattarci Servizio Clienti

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.