Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

Altri documenti

753947

Sigma-Aldrich

ICMA

97% (HPLC)

Sinonimo/i:

1′,4′-Dihydro-naphtho[2′,3′:1,2][5,6]fullerene-C60, C60 derivative, indene-C60 monoadduct

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Formula empirica (notazione di Hill):
C69H8
Numero CAS:
186682-36-0
Peso molecolare:
836.80
Codice UNSPSC:
12352103
NACRES:
NA.23

Saggio

97% (HPLC)

Forma fisica

solid

Perdita

0.5 wt. %, 390 °C

Punto di fusione

320-340 °C

Energia dell’orbitale

LUMO 3.84 eV (CV)

Prestazioni di un dispositivo OPV

ITO/PEDOT:PSS/P3HT: ICMA (1:1)/Al

  • Short-circuit current density (Jsc): 10.56 mA/cm2
  • Open-circuit voltage (Voc): 0.69 V
  • Fill Factor (FF): 0.54
  • Power Conversion Efficiency (PCE): 3.92 %

ITO/PEDOT:PSS/P3HT:ICMA(1:1)/LiF/Al
  • Short-circuit current density (Jsc): 9.66 mA/cm2
  • Open-circuit voltage (Voc): 0.65 eV
  • Fill Factor (FF): 0.59
  • Power Conversion Efficiency (PCE): 3.65 %

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Descrizione generale

Dipole moment of indene-C60 monoadduct (ICMA) was estimated to be 2.34 debye. Film formation of ICMA under optimum conditions was studied.1 As a potential candidate for field effect transistors (FETs), ICMA exhibits unipolar n-channel characteristics and high electron mobility.

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Polarity and Air-Stability Transitions in Field-Effect Transistors Based on Fullerenes with Different Solubilizing Groups.
Yu H, et al.
ACS Applied Materials & Interfaces, 5(11), 4865-4871 (2013)
Hyunbum Kang et al.
ACS applied materials & interfaces, 4(1), 110-116 (2011-12-14)
The ability to tune the lowest unoccupied molecular orbital (LUMO)/highest occupied molecular orbital (HOMO) levels of fullerene derivatives used as electron acceptors is crucial in controlling the optical/electrochemical properties of these materials and the open circuit voltage (V(oc)) of solar
Beyond PCBM: Understanding the Photovoltaic Performance of Blends of Indene-C60 Multiadducts with Poly(3-hexylthiophene)
Nardes, A. M.; et al.
Advances in Functional Materials, 22, 4115-4127 (2012)

Articoli

Optoelectronic Devices Based on Diketopyrrolopyrrole (DPP)-containing Conjugated Small Molecules

Optoelectronic Devices Based on Diketopyrrolopyrrole (DPP)-containing Conjugated Small Molecules

Polymer-Sorted Semiconducting Carbon Nanotubes for Transistors and Solar Cells

Single-walled carbon nanotubes (SWCNTs) are promising materials for use in the active channel of field-effect transistors (FETs), photoabsorbing layers of solar cells and photodetectors because of their ultrafast charge transport mobility.

Soluble Pentacene Precursors

Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.

Development of Small Molecule Donors for Solution-Processed Organic Solar Cells

Solution-processed organic photovoltaic devices (OPVs) have emerged as a promising clean energy generating technology due to their ease of fabrication, potential to enable low-cost manufacturing via printing or coating techniques, and ability to be incorporated onto light weight, flexible substrates.

Vedi tutto

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.